|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#71
|
|||
|
|||
|
Sponsored Links | |
|
#72
|
||||
|
||||
Why did u have to change the belt? Was it showing signs of wear? Any symptoms while driving
__________________
2001 X5 4.4i WHITE-Loaded like a baby's diaper SOLD |
#73
|
|||
|
|||
I've just read this trhead from start to finish, big thumbs up for all the detail and pics !
I'm expecting my gearbox to fail sometime, when that happens I guess I may as well do the transfer chain at the same time. |
#74
|
|||
|
|||
Helllll noooo! if I had to perform this heaviest job on my X, trust me! I would rather start selling it parts by parts...Hellll no I ain't gonna F"""K with that.
|
#75
|
|||
|
|||
Sweet the job isn't that hard at all!
|
#76
|
|||
|
|||
Exhaust manifold gasket needs replacement!
Although! you made me smile by knowing that the job isn't hard at all. Also, I wanna ask you what do you think about the (Exhaust manifold gaskets on the side and the other one that connect the muffler pipe through the manifold near the front oxygen sensors. Are they all the same??? Otherwise I cannot locate or identify the ones that joint the muffler to the exhaust manifold.
Any help or pic would be appreciate! Thanks (01 X5 4.4i) |
#77
|
||||
|
||||
Great write up. I'm sure this will come in handy someday.
|
#78
|
|||
|
|||
I'm with you on that but want to say "great write up hopefully this will never come in handy anyday!"
|
#79
|
|||
|
|||
Exhaust manifold gasket needs replacement!
Hey guys!
Here's what I'm looking for to replace under my car, because I just found out there's leak there from the exhaust gasket area. And when I look under the car, 1 bolt seems completely missing on each side of the muffler pipe just after the oxygen sensors. I'm referring exactly to #2 on the diagram. see picture below... |
#80
|
|||
|
|||
Unfortunately this gasket seems to be difficult to find because I cannot locate it anywhere on any diagram. I don't know if I should use maybe #4 to just cut it in the middle and make one for each side, also wonder if it's gonna fit properly I'm not so sure. Number#2 attach to number#6 on each side, and there's a gasket in the middle which is difficult to be found. However this gasket picture above is for the X5 3.i and did not specify my car under the list which is a 4.4i M62.
Last edited by mysweetx5; 04-17-2011 at 07:13 AM. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|