|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
11-05-2010, 08:43 AM
|
||||
|
||||
|
chas3 - thanks I'll do that
 jdudjak - I hope mine is an isolated case. I tried to dissect the old camera and found out why it died - it drowned!!! Look at the flooded camera inside. I couldn't save the LED lights chas3  Everything was flooded and also smelled like burnt electronics.  Well that's it for this one - to the garbage can! Last edited by fullmetaljacket; 11-05-2010 at 09:38 AM. 
|
|
#2
11-08-2010, 06:19 AM
|
|||
|
|||
|
Makes me wanna add fuses on both of my relays.
I hope the infiltration was caused by the wires side of the camera case (top side when you have the camera installed). I kinda sealed that one with some silicone. But if it was the bottom side (where the camera spot and leds are), there isn't much sealing you can do there.
|
|
#3
11-12-2010, 10:54 PM
|
|||
|
|||
|
Hi fullmetal and chas3:
pls help. 1. i have an X5 ( E53) model, i check my ear view license light ( it says 0059164, C5W, PC HT) . 2. can i buy from this seller? will it fit my X5 ( E53 model). BMW 3 5 X5 X6 Series E46 Car Rear View Camera: eBay Motors (item 150472998891 end time Nov-24-10 23:21:08 PST) 3. If yes, should i get type A or type B. 4. Or should i buy from other seller a rear view cam that would exactly fit into E53 without much modification, if yes, from which seller. Thanks in advance
|
|
#4
11-12-2010, 11:11 PM
|
|||
|
|||
|
No, the camera from that maya.yoyo dude does not fit into license plate light, at least not on FL models. You will have to cut through the trim (photos in post #73). If you are ok with that, you must definitely get type A.
|
|
#5
11-14-2010, 06:43 AM
|
||||
|
||||
|
This is the same seller I bought my camera from maya.yoyo. I had no problems with the shipping, cost and after sales returns / re-purchase.
The problem is that the camera - TYPE A or even TYPE B does not really FIT the License Plate Light Receptacle. It's not really PLUG and PLAY. As I said you will do some simple modifications - dremmelling, sanding and adjustments will have to be done to install even TYPE A. TYPE A is the closest fit. Oh before I forget, you have to seal those holes and spaces with silicone sealants as these type of cameras are NOT WATERPROOF at all! Don't forget that.
|
|
#6
11-14-2010, 09:48 AM
|
|||
|
|||
|
Chas3 & fullmetaljacket. Thanks for the feedback. Appreciate it
|
|
#7
11-14-2010, 10:40 AM
|
||||
|
||||
|
Love to do the same
Is have a few questions...
1) Is there a wireless cam set up out there anywhere? 2) With factory nav, does even the wired version work on the factory nav? Thanks in advance! Mike
__________________
2009 E70 White w/black int 2006 E53 X5 4.8is Sold 2000 SVT Cobra R #193 2003 SVT Mustang convertible
|
|
#9
11-27-2010, 02:10 AM
|
|||
|
|||
|
Shurap1. This is the resistor that I have on order to get rid of the problem "Check Licplate". When it gets in I shall install it. There are a few resistors on EBAY that you can purchase also.
6 Ohm, 50 Watt LED light bulb Load Resistor
|
|
#10
11-27-2010, 10:27 AM
|
|||
|
|||
|
Quote:
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
|
|
Hybrid Mode
