Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
Arnott
User Name
Password
Member List Premier Membership Today's Posts New Posts

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #8  
Old 09-20-2025, 03:16 AM
Member
 
Join Date: Feb 2011
Location: Calgary, Canada
Posts: 2,282
Clockwork is on a distinguished road
Quote:
Originally Posted by TerminatorX5 View Post
Here is the schematics of that cable... there are only so many ways you can go...


do you have a 300 kOhm resistor laying around somewhere? you could pick one up from the shack, and test the pins on the car harness, to see, which pins will pick up the AUX... or... test the harness itself for the resistance - just gotta remember, that one side (the 3.5mm side) will not measure resistance, as there are two capacitors in line with each audio wire...
thanks for this info.
I performed this mod years ago but without soldering the 300k ohm resistor i place, but just wrapped tightly around the metal connections (removed the pins from black plastic housings) but over time it must have loosened as it was intermittently working.

My e53 uses the B1 connection at the black plastic housing.

I was at a pick-n-pull and grabbed an e46 OE Aux cable...and upon comparing, the same three wires exist but with a different black plastic housing connector and different pinlayout location (but same shape pins).
I rewired this e46 cable to the e53's connection plastic housing for B1 and upon hooking it up, still no fix...

So, i removed the fabric tape off the e53's inline motherboard to see if there was a crack in any solder but nope. so i tested the resistor with a multi-meter and its value settled in at 297k ohms.
perhaps this wasnt enough to trigger the AUX feature.
so i soldered a 300k ohm resistor by the black plastic housing between the white with red stripe and white with blue stripes. i connected it into vehicle and this time its perfect again.

SO, idecided to add the same resistor to the other e46 cable I have, too, so its a back-up

all thanks to this diagram you supplied in post 6. cheers
__________________
I swear, my cars are like a girlfriend.
Sometimes its a rough ride, sometimes its smooth motorin'.
Sometimes she doesnt like how i treat her and sometimes i dont like how she behaves.
BUT at the end of the day, she loves it when I am inside her.

_______________________
'91 850i
'05 X5 4.4i
'09 Clubman S

Last edited by Clockwork; 09-20-2025 at 04:56 AM.
Reply With Quote
 

Bookmarks

Tags
aux cable install, aux input, aux/ipod


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 06:41 AM.
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.