|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
||||
|
||||
|
Need a used engine 4.6is - any suggestions
Hey guys,
After a really long story of 3 months in the shop and the mechanic ruining my engine, the shop is now going to either replace the heads or put in an engine. Two questions, does anyone make a remanufactured engine for this vehicle or is there a place to look for a used one. After replacing the timing chain the mechanic did not bother to check the oil pump and it was clogged with the plastic chain guide that got torn up...short end....the vehicle was driven multiple times with no oil pressure or oil in the engine. Shop replaced all the lifters but it still sounds terrible. Engine seems to run really good but just an amount of time before it goes out. Appears now that the cam is off somewhere causing the clicking noise since it has new lifters. Such a nightmare but the shop did take responsibility for it. Too bad it took 3 months to figure out it needed heads or an engine. Who knows what all has gotten damaged. If you really want to know the 3 month cycle of events just ask. New timing chain and guide New fuel pump New lifters New gaskets New oil sperator and now new heads or more. Thanks Shawn
__________________
2002 BMW X5 4.6is Nav, Piano Black Trim, Black Leather, 20.8 MPG HWY DALLAS TO MEMPHIS 74 MPH |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
|
|