|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
03-22-2014, 08:34 PM
|
|||
|
|||
|
how to bench test a bordmonitor?
I am trying to benchtest a bordmonitor but I cannot figure out if it's required an iBus message or it should power up if I only connect it to power.
On the car doesn't seem to work and going by the connectors pinout I should be able to power it on by applying ground on pin 2 and +12V on pin 7 and 11 on the blue connector. Although by in the pinout pin 11 is the switched 12V when I measured it on the car harness this pin 11 is not populated. That makes me think that I need an iBus message to get the bordmonotor powered up. Any thoughts? 
__________________
 4.8is 2004 imola red 4.8is 2005 Black on Black - DINAN/2 sold 4.4 2004 X5 2003 330xi 2008 328xi - sold 4.4 2000 X5 - sold Last edited by fmugur; 03-22-2014 at 08:46 PM. 
|
| Bookmarks |
|
|
|
|
Threaded Mode
