Quote:
Originally Posted by TriX5
Finally getting back to this.
Got the cable support off the back of the block,it is held on by a small 6mm bolt and holds the harness going to the transmission. I also removed the RH brake and disconnected the swaybar end link. Notable are the four wire connections that need to come off: the ABS sensor, the ride height sensor, the ground strap and the AC clutch. Still have to get the driver's side brake off.
I have decided to disconnect the struts from the hub carriers. The calipers will be zip tied to the front springs.
Pics later. :-)
|
Wow you are definitely taking your time on this (one year later
)
10-02-2016, 09:38 PM
Hybrid Mode
