Build Log: M57 X5

[dw280]

I ordered a custom spec’d set of wheels using your wheel/spacer setups for reference. Your information is amazing, and your build is inspiring. Hopefully my calculations are right and I’ll be joining the 295/45R20 club soon.

[ucsbwsr]

Originally Posted by dw280

I ordered a custom spec’d set of wheels using your wheel/spacer setups for reference. Your information is amazing, and your build is inspiring. Hopefully my calculations are right and I’ll be joining the 295/45R20 club soon.

Right on, glad the thread is useful! Keep in mind 295/45/20 can rub up front depending on your specific tires. It will wear itself down over time and shouldn't be an issue. You can see a pic of where it rubs in my previous post.

[dw280]

Originally Posted by ucsbwsr

Right on, glad the thread is useful! Keep in mind 295/45/20 can rub up front depending on your specific tires. It will wear itself down over time and shouldn't be an issue. You can see a pic of where it rubs in my previous post.

I don’t have my note sheet in front of me, but I figured out the offset based on the ZL1 wheels with the Toyo’s and the spacers you ran, since the Toyo’s were a bit wider if I recall than the Hankook’s. Ordered wheels with an offset so I wouldn’t need a spacer in the front, just one in the rear. Once I get everything installed, I’ll post it in a new thread and give you the credit you’re due for all the leg work.