|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
E60 LCI comfort seat on a pre-LCI E70?
I got hold of a pretty good shape set of comfort seats from an E60 LCI and am figuring out how to put them onto my pre-LCI E70 (with electric seat and lumbar support). Key challenge is the seat rails for which I imagine that I can just swap the whole rails between the two, is it correct? Wiring wise it only involves adding a K-BUS line to FRM and a few other wires for the active headrest which I can deal which since I did the same retrofit for my E60. Any one here attempted similar retrofit and is the rail swap ok in your opinion? Thanks |
Sponsored Links | |
|
#2
|
||||
|
||||
I did, and I gave up. As you realize, the rails are different. I thought I could swap them but there were so many wire connections etc. I got lazy and found some E70 seats and sold the E60 comfort seats. Much easier for me and less hassle.
__________________
Run flat tires? Nein Danke!!! |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|