New to Forum-Need Help

[Cyrix2k]

That small 12v wire goes to your CAS (car access system). It will only be at 12v when the starter is actually commanded to start. Most of the issues that would lead to a no-start should throw codes.

[chandlerhayes01]

i will have to recheck the codes when i have the chance.

i did take and put 12v on the starter to see if it was working, so i hope i didnt screw anything up.

[Cyrix2k]

Originally Posted by chandlerhayes01

i did take and put 12v on the starter to see if it was working, so i hope i didnt screw anything up.

that's fine (I even have a tool that does exactly that). I take it the starter worked?

[B4_685]

Looks like could be a module killing the power somewhere - you need a code reader dude - need to work out whats up before you go guessing


2012 E70 50i

[chandlerhayes01]

it did turn over when i i put the 12v on it.

Also, i bought a code reader specifically for this. I am just not very proficient with using it.

[B4_685]

Cool - can you find out what codes are stored pls?


2012 E70 50i

[chandlerhayes01]

yes i will pull the codes tomorrow.

The car is at my mother in laws house.