I FIXED the Annoying RATTLE/CREAKING from rear hatch!!

[bcb1]

Rufusdedog, You da man! That's an awesome fix.

I've been driving myself nuts (and that doesn't take much, believe me) narrowing down the damn rear rattle noise. Putting felt pads on the rubber bumper stops helped, but hasn't completely cured it. I still get it sometimes, and you are so right - it's hard to recreate the noise!

First thing I'm going to do when I get home is put foam in that space. Hell, I'd even remove the plastic covers if that means it would never rattle again!

[brian5]

Originally Posted by bcb1

<<snip>>
First thing I'm going to do when I get home is put foam in that space. Hell, I'd even remove the plastic covers if that means it would never rattle again!

I cut some felt that has adhesive on one side -- you can find at most drug or hardware stores. Seems to have helped but I need to get out there and test some more.

[y5choi]

try a craft store like Michael's. I bought this 8 1/2 by 11 sheet of black "foam" from there (like more rubbery than felt) and it works really great in killing the noise. I have not heard any interior noise since I stuck 1"X1"pieces on the corners with some double sided tape.

[rufusdedog]

The credit goes to y5choi. I simply followed up on his findings.

I think I have a more permanent solution than foam tape. I ordered some Dynamat, enough to cover the entire back of the plastic cover. I'll let everyone know how it works out.

[rufusdedog]

UPDATE: I installed the Dynamat today. Covered the entire underside of the plastic piece that flips over the lower tailgate. Enormous difference! No creaking or cracking and it actually muffles external noise. Worthwhile investment!

[bigx5er]

Picture please!

Where did you get your dynomat from and how much do you need?

Thanks!

[y5choi]

Originally Posted by rufusdedog

UPDATE: I installed the Dynamat today. Covered the entire underside of the plastic piece that flips over the lower tailgate. Enormous difference! No creaking or cracking and it actually muffles external noise. Worthwhile investment!

Glad it worked out for you.

[rufusdedog]

Got it on ebay. 4 square ft is a little more that what you need, but you can cut up the remaining piece and put it to good use elsewhere in the X5.
I'd post a pic, but really nothing to see. Just the bottom of the plastic piece now covered with dynamat (aluminumium foil is all you see).


http://cgi.ebay.com/Dynamat-Xtreme-Extreme-BULK-32-x18-Sheet-4-SQ-FT-14-9_W0QQitemZ250313123017QQcmdZViewItem?hash=item250 313123017&_trksid=p3286.c0.m14&_trkparms=72%3A1205 |66%3A4|65%3A12|39%3A1|240%3A1318

[bigx5er]

Originally Posted by rufusdedog

Got it on ebay. 4 square ft is a little more that what you need, but you can cut up the remaining piece and put it to good use elsewhere in the X5.
I'd post a pic, but really nothing to see. Just the bottom of the plastic piece now covered with dynamat (aluminumium foil is all you see).


http://cgi.ebay.com/Dynamat-Xtreme-Extreme-BULK-32-x18-Sheet-4-SQ-FT-14-9_W0QQitemZ250313123017QQcmdZViewItem?hash=item250 313123017&_trksid=p3286.c0.m14&_trkparms=72%3A1205 |66%3A4|65%3A12|39%3A1|240%3A1318

Thanks. I also just found that same piece on Amazon, just ordered it with my prime shipping option. I'll install it and report back. Hope it works as well for me as it did for you.

[bigx5er]

Installed the Dynamat over the weekend. It works! No more rattles from the tailgate.

Thanks for the idea