Aero Kit install - DIY?

[jayjay_dee]

so i can do this whole thing without using any adhesive?

[S4YFR]

yep theres no sticky involved in the whole install

[silverbimmer]

Originally Posted by S4YFR

its simple to fit i did mine after downloading the PDF instructions given on this site. there is a few things you need to pay close attention to. when your fitting the front apron frame you need make sure you 100% get it bang on in the middle of the bumper otherwise the two outer parts wont fit flush against the bumper.

other than that everything else is simple an straight forward on the front.
the instructions mentioned something about a heat gun to form the front kit but didn't need to use any of that.

the rear is the same principal make sure you get the rear sub frame 100% in the middle other wise the outer parts don't line up properly.

ignore the time it says on the pdf for install that only applies after you installing a few cause it took me about 1.hr 45 mins. just take your time installing and follow the instructions carefully but the key is the middle sub frame must be in the middle an when your finished you'll have a big smile on your face... the car will then look the business

thanks to the pdf instructions being posted on this site

where did you find the PFD? I looked everywhere but didn't see anything. Can you please let me know? thanks.

[S4YFR]

Originally Posted by silverbimmer

where did you find the PFD? I looked everywhere but didn't see anything. Can you please let me know? thanks.

try this link an then click on the aero kit pdf. theres plenty of other interesting pdf on this link all e70 related

Index of /pdf/e70

[S4YFR]

Index of /pdf/e70

[silverbimmer]

Originally Posted by S4YFR

try this link an then click on the aero kit pdf. theres plenty of other interesting pdf on this link all e70 related

Index of /pdf/e70

Thanks.

[mauroavella]

Just got my Aero Kit for my 2010 E70 and this post was exactly what I needed to save me some installation money... thx!!