2011 x5 35i Painted Reflector Install DIY

[XCUSM5]

Thanks for the help from this thread. Spoke to Nate at IND, paid for the reflectors, should be here soon. To me its $75 well spent. I've done the paint-match on 2 E46 M3s, Z3 M Coupe, E92 M3... it really makes a big difference. Those ambers just look terrible, and although the clears look okay I don't think they will go as nicely on Vermillion. I know the installation on the 35d is a little trickier but it shouldn't be too much of a problem. If I have pointers to help I will be sure to post them on here.

[mpriceii]

Please post pics and pointers on the removal of the front bumper. I gave up when I tried and haven't attempted it again.....Kills me to have the painted front reflectors and not have them installed!!

[midwest x6]

Originally Posted by XCUSM5

Thanks for the help from this thread. Spoke to Nate at IND, paid for the reflectors, should be here soon. To me its $75 well spent. I've done the paint-match on 2 E46 M3s, Z3 M Coupe, E92 M3... it really makes a big difference. Those ambers just look terrible, and although the clears look okay I don't think they will go as nicely on Vermillion. I know the installation on the 35d is a little trickier but it shouldn't be too much of a problem. If I have pointers to help I will be sure to post them on here.

I've got an 011 35d and thinking of doing this mod too...Can you post how it went with yours?

THX!

[smiler51]

Hey Guys,

i am getting my 2007 e70 shipped to me right now.

Are the original orange sidemarkers flush with the bumper or stick out?

If they are flush, i would just paint them instead of replace them.

Thanks

Smiler51

[DCC]

Does anybody know if the shape/size of the reflector has changed from the 2010 model to the current bodystyle (no camera vehicle)
Thanks

[rh71]

Originally Posted by DCC

Does anybody know if the shape/size of the reflector has changed from the 2010 model to the current bodystyle (no camera vehicle)
Thanks

The reflectors in the LCI models now are longer. The new height is to accommodate the camera whether they are in place or not.

[DCC]

OP,
I am having a hard time removing the front grille via the hole you show
Which way do i pull or where do i squeeze to release the clips?
Any tips would be appreciated
Thanks