|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#181
|
||||
|
||||
__________________
For Sale Thread: http://www.xoutpost.com/classifieds/...ia-bridge.html 2004 X5 3.0i - Sold 1998 328i Convertible (e36) -sold 2004 325xi (e46)- sold Any questions?: DICE mediabridge|gauge rings|LED Angel Eyes|front door carrier|GT1/DIS/INPA/NCS|bluetooth retrofit|SIRIUS Retrofit|fuel filter|Dorman DISA|Roof Rack Delete|Sunroof drains|AC drains|rear sway bar swap|o2 sensors|VCG|Osram Night Breakers |
Sponsored Links | |
|
#182
|
||||
|
||||
Hi Brian
Whila I am still waiting for my navcoder cable, I checked the eject box switch and it is working up to a small pcb in the eject box. If I press the button, does it just simply pull a pin of the ULF to the GND?
__________________
2004 X5 4.8is Pinoy from the land of sand |
#183
|
||||
|
||||
Yes, all the pairing button on the eject box does is pull ULF pin 32 (I think) to ground. Verify the correct pin on the 54-pin ULF plug, but that is all it does.
__________________
SOLD 2000 E38 750iL Highline Edition, Upgraded with the lastest 2006 X5 Electronics MKIV Navigation, 16:9 Display, Bluetooth, TV/Video with Backup Camera, Sirius, and Aux Input |
#184
|
||||
|
||||
Cool Thanks!
__________________
2004 X5 4.8is Pinoy from the land of sand |
#185
|
|||
|
|||
hello guys,
i would like to have bluetooth at my 06/2002 Euro E46 and was searching for information. what i found out is: i should have the second generation phone wiring as my car is produced later than 03/2002 and i have BIT2 phone. so it should be plug&play to buy a ULF and use it instead of the BIT2 hardware. but, i came across that i already have a bluetooth antenna under the ash tray as my car also has bmw assist. doesnīt this mean that my car already has a TCU? galaxy s2 couldnīt find it, should it? am i right, that i could buy a GSM TCU with bluetooth support (which p/n is the first with bluetooth?) and just change the tcu? do i have to unmount the BIT2 completely? just to be more precise, i will add the options list from my car: Quote:
|
#186
|
|||
|
|||
Just chuck in a late model TCU and you are good to go. I think they stopped making them in 2007 and the e83 and e85 shipped the last. Actually they were early hardware with new software (remanufactured)
|
#187
|
|||
|
|||
Quote:
If that's the case, hopefully your bluetooth antenna cable (FAKRA style) will plug into the bluetooth connection on the new TCU. If not, you may need to remove the plastic casing around the FAKRA connector in order for it to plug into the TCU.
__________________
2010 X5 3.5d: SOLD, but miss the torque... 2004 X5 4.4i: SOLD, but served us well |
#188
|
|||
|
|||
Quote:
Well, it turns out to be a little bit more complicated then i thought... plugged the tcu instead of the bit2 and blowed fuse #7 i unplugged the SES and the BIT2 phone and tried a new fuse: didnīt blow #7, but unfortunally the tcu wonīt be shown in inpa and dissapeared in the widescreen. i donīt know if the tcu is blown or the wiring is still faulty |
#189
|
|||
|
|||
Quote:
Check out my post http://www.xoutpost.com/electronics/...-new-post.html |
#190
|
|||
|
|||
Even with the new wiring the tcu wonīt be recognized by the car and even not by navcoder
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|