[eas] Official DICE iPod integration kit Q/A thread

[Tom G.]

[scs_x5]

Is the font small/large issue on the Nav display with the ICELINK PLUS fixed with the DICE?

[Tom G.]

Originally Posted by scs_x5

Is the font small/large issue on the Nav display with the ICELINK PLUS fixed with the DICE?

This issue has been corrected with DICE.

[aise]

here is a picture of my cd box, does this cable on the left mean that i have digital DSP? car is 2001 530i.
http://www.zone.ee/aise/DSC00088.JPG

[Tom G.]

Originally Posted by aise

here is a picture of my cd box, does this cable on the left mean that i have digital DSP? car is 2001 530i.
http://www.zone.ee/aise/DSC00088.JPG

This is a Digital DSP setup, this is the kit you need:

DICE iPod Integration Kit for BMW - DSP
http://www.europeanautosource.com/pr...roducts_id=284

[eyedoc]

Hello Tom:

I am trying to install the i-BMW-T in a 2006 BMW X5 4.4i without Nav and without DSP. I removed the fuses for the radio (#7, 72, 73) and cd changer (#75). I connected the 3- and 6-pin connectors to the DICE interface cable. Next, I connected the interface cable to the DICE module. Then I connected the dock cable to the DICE module. Then I connected the dock cable to my iPod. Finally, I re-inserted the proper fuses. I turned on my car and radio. When I hit mode, the stereo only switches between radio and cd player. The DICE/iPod does not show up as an option, and there is no initialization. Also, the iPod does not receive any charge while connected to the dock cable and DICE module.

What am I doing wrong? Do I really have to disconnect the battery? Or is removing the fuses sufficient?

My iPod is a 3rd generation unit with version 2.3 firmware. I also tried my girlfriend's photo iPod, version 1.2.1, with no luck as well.

Thanks in advance for your help.

[Tom G.]

Originally Posted by eyedoc

Hello Tom:

I am trying to install the i-BMW-T in a 2006 BMW X5 4.4i without Nav and without DSP. I removed the fuses for the radio (#7, 72, 73) and cd changer (#75). I connected the 3- and 6-pin connectors to the DICE interface cable. Next, I connected the interface cable to the DICE module. Then I connected the dock cable to the DICE module. Then I connected the dock cable to my iPod. Finally, I re-inserted the proper fuses. I turned on my car and radio. When I hit mode, the stereo only switches between radio and cd player. The DICE/iPod does not show up as an option, and there is no initialization. Also, the iPod does not receive any charge while connected to the dock cable and DICE module.

What am I doing wrong? Do I really have to disconnect the battery? Or is removing the fuses sufficient?

My iPod is a 3rd generation unit with version 2.3 firmware. I also tried my girlfriend's photo iPod, version 1.2.1, with no luck as well.

Thanks in advance for your help.

Removing the fuses works about 99% of the time, sometimes the battery cables must be pulled for completely power down the system.

The 3 pin connector (BMW side) has a brown wire, can you tell me if it's located in the middle or the end positon of the connector? This will determine if you are using the correct connector.

[cordovar]

Originally Posted by eyedoc

Hello Tom:

I am trying to install the i-BMW-T in a 2006 BMW X5 4.4i without Nav and without DSP. I removed the fuses for the radio (#7, 72, 73) and cd changer (#75). I connected the 3- and 6-pin connectors to the DICE interface cable. Next, I connected the interface cable to the DICE module. Then I connected the dock cable to the DICE module. Then I connected the dock cable to my iPod. Finally, I re-inserted the proper fuses. I turned on my car and radio. When I hit mode, the stereo only switches between radio and cd player. The DICE/iPod does not show up as an option, and there is no initialization. Also, the iPod does not receive any charge while connected to the dock cable and DICE module.

What am I doing wrong? Do I really have to disconnect the battery? Or is removing the fuses sufficient?

My iPod is a 3rd generation unit with version 2.3 firmware. I also tried my girlfriend's photo iPod, version 1.2.1, with no luck as well.

Thanks in advance for your help.

Yup im having this same problem , let me know how you fixed it ?

Thanks