[eas] Official DICE iPod integration kit Q/A thread

[docridge]

Originally Posted by Tom G.

Are you leaving the iPod connected to the DICE overnight in the vehicle?

Not every night. It does not seem to make a difference for either problem if I leave it connected or disconeected at night. Any ideas?

[shrugged]

Hi Tom,

I just received the Silverline Pro + DSP yesterday, and I'm having some install problems today. It's going into a 2006 X5 w/ nav.

I've taken the DSP module out of the equation to try to simplify troubleshooting.

When I browse to Disc 6, I just see * DICE * on the nav display. I select track 2 (have titles displayed on the nav), then plug in my iPhone 3G and go to Disc 5.

The iPhone will display the "Accessory not made to work with iPhone" message. Occasionally it will start playing a track (I'd say once out of every four times that I plug in the iPhone). There are no track/album/artist titles, it just says the track number on the nav.

If I advance the track number using the buttons on the radio, the song doesn't change. There is a slight delay, and then it picks up playing the same song again (the track number will change - just not the song).

If I leave the DSP in the equation, I just get a beeping/static type noise that goes in and out a few times per second.

Thanks in advance!

EDIT: I think I'm half way there. I moved both of the iPod switches to the ON position (they were both off). Now I can control everything from the iPhone touchscreen, and it plays music and works (no title/artist/info on the nav screen, but I can live without that).

Unfortunately DSP still does not work. If I route the 6-pin through the DSP, all I get is the static/screeching noise. I've verified the 12v connections with a multimeter. What else can I try?

[docridge]

Try CD 6, Track 6 to see if the display works.

[shrugged]

Originally Posted by docridge

Try CD 6, Track 6 to see if the display works.

If I go to CD 6, Track 6 it scrolls through, Core 1.5, Car 1.0, iPod 1.2, Aux 1.0.

I drove around yesterday and I also noticed that when I'm using the ipod, I can't use my navigation. If I press the right side of the Mode button on the nav, the nav screen comes up for a second, then the screen goes back to the CD player screen.

Help!

[docridge]

Originally Posted by shrugged

If I go to CD 6, Track 6 it scrolls through, Core 1.5, Car 1.0, iPod 1.2, Aux 1.0.

I drove around yesterday and I also noticed that when I'm using the ipod, I can't use my navigation. If I press the right side of the Mode button on the nav, the nav screen comes up for a second, then the screen goes back to the CD player screen.

Help!

What you need to do is, go to CD6, Track 6 and then go back to CD1, you will see the track titles then. After you go to CD1, then from there you can go to CD 2 to see your playlists or to CD3 to see the Artists list. Hopefully this helps.

[BeckMule]

Originally Posted by shrugged

If I go to CD 6, Track 6 it scrolls through, Core 1.5, Car 1.0, iPod 1.2, Aux 1.0.

I drove around yesterday and I also noticed that when I'm using the ipod, I can't use my navigation. If I press the right side of the Mode button on the nav, the nav screen comes up for a second, then the screen goes back to the CD player screen.

Help!

When you are using the DICE the only way to get your NAV screen back is to hit the MENU button and then click on NAVIGATION (i.e., you cannot toggle between the two by using the Mode button, you instead need to go back to the home screen and select gps). This is not ideal, but it is how it works.

[shrugged]

Originally Posted by docridge

What you need to do is, go to CD6, Track 6 and then go back to CD1, you will see the track titles then. After you go to CD1, then from there you can go to CD 2 to see your playlists or to CD3 to see the Artists list. Hopefully this helps.

That worked. Thanks!

Originally Posted by BeckMule

When you are using the DICE the only way to get your NAV screen back is to hit the MENU button and then click on NAVIGATION (i.e., you cannot toggle between the two by using the Mode button, you instead need to go back to the home screen and select gps). This is not ideal, but it is how it works.

Okay, that makes sense.

Now I just need to get the DSP module working.