Editing Splash Screen on V26-09a Beta - Page 20

VancouverM · #**191** 02-20-2006, 06:12 PM

Quote:

Originally Posted by beedeeman

Yes, as soon as you exchange. The image should be displayed. You may have to scroll down to it again. As you did before, there are two images at HEX address [b1f418] the first is blank and you will not see anything. The one you need is below that.

When you start UltraISO, the window will be split into four quadrents. The top left labeled "Image" has the String in it.

You do not have to save it as MDS/MDF, ISO should work fine also. Most people are using Alcohol120 and require MDS/MDF format.

I totally forgot my manners: First of all, a great big THANK YOU! to all who worked on this little project- its fantastic!

As a follow-up to my previous questions- the GIF image I was using indicated all the appropriate attributes but did not work (it was made and saved using ACDSee Editor). When I loaded the same image and saved it using MS Paint it worked

. I still don't see the 20060220_120036 entry in the top left window ??? Attached is a screenshot of what I see. "NAV_SW" was already there from the base V26.09a ISO I edited, I did not edit that entry. Is that what is being referred to?

Thanks again everyone- outstanding work!

Sponsored Links

Four_Ari · #**192** 02-20-2006, 06:18 PM

Sorry to be off topic.. But can I noticed that people where changing the blue line info. I think that our Nav while in Full screen mode should say the street your on the bottom blue line. Can anyone do this?

I'm getting an Security error when trying to load the navboot into the gifextractor?

Thanks
-Ferrari

beedeeman · #**193** 02-20-2006, 06:44 PM

Quote:

Originally Posted by VancouverM

I totally forgot my manners: First of all, a great big THANK YOU! to all who worked on this little project- its fantastic!

As a follow-up to my previous questions- the GIF image I was using indicated all the appropriate attributes but did not work (it was made and saved using ACDSee Editor). When I loaded the same image and saved it using MS Paint it worked

. I still don't see the 20060220_120036 entry in the top left window ??? Attached is a screenshot of what I see. "NAV_SW" was already there from the base V26.09a ISO I edited, I did not edit that entry. Is that what is being referred to?

Thanks again everyone- outstanding work!

Yes, your correct. If "NAV_SW" was there then you're fine, good to go

. Enjoy.

beedeeman · #**194** 02-20-2006, 06:46 PM

Quote:

Originally Posted by Four_Ari

Sorry to be off topic.. But can I noticed that people where changing the blue line info. I think that our Nav while in Full screen mode should say the street your on the bottom blue line. Can anyone do this?

I'm getting an Security error when trying to load the navboot into the gifextractor?

Thanks
-Ferrari

Screen shot? of error

beedeeman · #**195** 02-20-2006, 07:14 PM

Quote:

Originally Posted by mdsbrain

Please excuse me if this is in a FAQ somewhere.

I might be the only casualty of this whole thing. I uploaded the image for the MINI and it worked great. I took a short drive, turned the car off for about 15min and then turned it back on. Car sat @ loading screen. I then pulled the battery and now it just loads the boot screen.

Would the fix for this be to reload and earlier firmware such as v26?

V26.09a is not stable. Some people are also having issues. Going back to V26 will take care os that. Also, the logo mod will work with V26.

KrisL · #**196** 02-20-2006, 07:16 PM

Quote:

Originally Posted by beedeeman

V26.09a is not stable. Some people are also having issues. Going back to V26 will take care os that. Also, the logo mod will work with V26.

I've driven about 500 miles with V26.09a so far, and the perspective mode is awesome. No problems here.

RealShakaZulu · #**197** 02-20-2006, 07:22 PM

Quote:

Originally Posted by mdsbrain

Please excuse me if this is in a FAQ somewhere.

I might be the only casualty of this whole thing. I uploaded the image for the MINI and it worked great. I took a short drive, turned the car off for about 15min and then turned it back on. Car sat @ loading screen. I then pulled the battery and now it just loads the boot screen.

Would the fix for this be to reload and earlier firmware such as v26?

Just got back in... are you still receiving the error? If so re-install v26... there should be no need to disconnect power, just put the disk in and give it a few minutes with the ignition on.

mdsbrain · #**198** 02-20-2006, 07:25 PM

Quote:

Originally Posted by RealShakaZulu

Just got back in... are you still receiving the error? If so re-install v26... there should be no need to disconnect power, just put the disk in and give it a few minutes with the ignition on.

I gave it a few minutes. It just sits at the logo and the buttons don't work. So I will reload v26. Then you think a reload of 26a will work or there is another problem?

KrisL · #**199** 02-20-2006, 07:27 PM

One more startup screen..

RealShakaZulu · #**200** 02-20-2006, 08:05 PM

Quote:

Originally Posted by mdsbrain

I gave it a few minutes. It just sits at the logo and the buttons don't work. So I will reload v26. Then you think a reload of 26a will work or there is another problem?

That's exactly what I am thinking.

Sponsored Links