No problem.

padding files are the files used to Pad the disc out so that the disc "knows" whats on the disc (to use and not to use).

You need the padding files from the 2010 disc to them make the 2114 disc (this will allow the unused categories to be accessed correctly).

You need to mod the following files

1: DB9/padding
2: TPD3.dic
3: /TPD/NCCBEUFNM_EUW_20130523/info.psc

the (my mistake), you have done the singal layer mods, thats fine.

did the 2013 disc work with poison? if yes, use the padding files from that, at a push you can just delete the 2013 2x DB files and then drag and drop the 2x 2014 db files and save and use that, its messy but should work

__________________
Sept 03, M3, Silver Grey. Retro-fits: Modded Mk4 DVD Drive, OEM Bluetooth, VR Control, Rainbow Speaker Upgrade, Sony SOT Amp, HK Sub, CCFL, Intravee II, NightMode.

you tell me that I need to modify the files: DB9 / padding, TPD3.dic and info.psc.
What changes should I do?

I have not tested the poison on 2013 disk.
the 2014 disc seems to work with poison (DB and BIBLIOGR)
it incorporates my radar in DB1 file.

PM me you email address and I will send you a pre modded 2014 disc image (no DB) that you can then just add your db files to.

__________________
Sept 03, M3, Silver Grey. Retro-fits: Modded Mk4 DVD Drive, OEM Bluetooth, VR Control, Rainbow Speaker Upgrade, Sony SOT Amp, HK Sub, CCFL, Intravee II, NightMode.

PM sent ...

hello,

I continued my testing of Version 2014 and 2007.
V32 mod + 2007 map ==> ok (icons and alerts).
V32 mod + 2014 map ==> ko ....

any idea? ....
thank you in advance ...

I had a look at the pdf you sent me and thats the correct procedure.!!

try using the 2014 DB files in the 2007 image and see if that works.

The modded image I sent you works for the ENG version of the 2014 disc mate as I'm using it and it does work!.

__________________
Sept 03, M3, Silver Grey. Retro-fits: Modded Mk4 DVD Drive, OEM Bluetooth, VR Control, Rainbow Speaker Upgrade, Sony SOT Amp, HK Sub, CCFL, Intravee II, NightMode.

if I understand well :

if I put the DB_0 and DB_1 (of the 2014 map) files into my 2007 map ISO, I would have the 2014 map informations ?
it would be cool ....

Subsidiary question ...
is there an equivalent procedure (as for the 2010 anterior versions) to modify an ISO of the 2014 map ?

Yes, for the main built in POI you would, the extra POI would be from 2007, but its just to test to see if it works, if it does you should be able to use a combination of 2007 and 2014 files to get it all working.

__________________
Sept 03, M3, Silver Grey. Retro-fits: Modded Mk4 DVD Drive, OEM Bluetooth, VR Control, Rainbow Speaker Upgrade, Sony SOT Amp, HK Sub, CCFL, Intravee II, NightMode.

in fact, I only need that:

1. speed cameras (icons and alerts) automatically instead of military items.
2. mobile cameras as POI (IDX files and URL).
3. these 2 things on 2014 map.

I have already do that for 2007 map.

Subsidiary question ...
is there an equivalent procedure for point 1 (icons and alerts) to modify an ISO of the 2014 map ?

thanks