think i have a bad DICE DSP adapter. Everything else comes up on the display with no audio. Tapped into the fat brown wire for the ground and the green/red for power and nothing at all no sound. any thoughts Tom or team?

Any thoughts Tom ? Thanks

Just curious, why didn't you use the purple/white wire and a nearby bolt for ground? I feel like you may not be getting power - did you test the wires?

-Cyrus

Recheck the wiring and test power/ground leads with a multimeter if handy - it's rare to ever see a bad DSP adapter.

Can you post a picture of your connections to verify it was wired up properly?

no meter on hand, uploading photos now for your review. I have tried to look at wires and can;t see to see anything not set up properly.. photos in a minute thanks:dunno:

below show the connections to get power to the DSP unit
also showing the DSP adapter connected to the coax on the amp
also shows the entire set up and how its all linked together
hope this helps trouble shoot... thanks Brian:dunno:

showing all units and how they are linked:dunno:

I see you have a MY04 X5, have you tried omitting the DSP adapter and just plugging into the 3/6 pin adapters?

There may be a change you are Analog DSP equipped, not requiring the adapter.

Just did with no change. Weird.

went to the DICE site again and it states i need a DSP adapter like the one i have, maybe it is a bad DSP unit? I have tried to call EAS as well. left messages no call back yet. back to the drawing board.