since you went back to original v32, did the problem disapear? as i am still having this bug but haven't figure out if it's coming from the OS or the Map itself...

All is fine with v32. Only the modified POIson version keeps barfing.

how do i copy 0506 files into 0507 when im using ultra iso ???

thanks

I have done all the changes but get the Info on the screen while updating "corrupted cd" now I´m looking step by step where the problem could be.
I´m familiar with the Software itself but one question the navboot has to be changed only in the BMWC01S correct? Because in BMWM01S is one too.

take the file out of ultra iso and copy on your harddrive

About rebooting software....
I have noticed if the navboot file gets too big becouse of the big flashimage or other icons, it becomes unstable..
I have solved this issue by replacing all the icons that are not used and mini boot screen to as small images as posible. (This in V29)
I see no reason that this would be diferent in V32 (have not upgraded my self yet to DL support)

Now i have a question of my own...
How hard would it be for the maker of the software, to let us dicide whitch poi to exchange, and if this is possible i would like this function not nececerely to work with sound allert, but just so i can have multiple pois show on screen.

I have made mine (have not tested it yet)
I have custom Swedish language and it is as follow
406 407 406 407 84 52 50 373 84 83
Hi Low Hi Low Pause "Varning Område Med Säkerhetskontroller" Pause Ping
It means Warning area with safety control (or something like that)

Correct, try and keep the navboot files as close to the OEM size as possible, the navboot patch does not increase the file size.

I changed the mini splash screen with a black blank pic and this makes all the other changes about the same size as the OEM navdoot.

I beleive nomad is looking at this, BTW if you don't want the alert just use 88 in #9 and you get no sound.

I've actually added my own wav file that says Hi-beep, lo-beep, "speed camera ahead", it seems to work quite nicley.

I ment more that i want the sound as it it now, but if function to add more pois to be shown all the time, for those that thay dont have to support voice

Nice i suppose that you added custom voice files

BTW how far from the cam do you get sound allert?
Do you get it only once ?

hello,

I've a question about step C (force SW Upgrade) => Is that step necessary if i use v29 (and i want to change for V32) ?

So if this step is not necessary, Must i copy lng_rel.tbl file from poison zip to my iso file (step D-3)?

thank you

Kind regards.

Ah, right, yes I see, I think that nomad is looking at a on/off switch in the menu so you can have an of/off.

It sounds like the OEM voice too, so a bit of a result.

It depends on speed, the distance is speed related, you *should* get 15 seconds warning to target.

Fixed distance setting were Ok for slower speeds but anything over 60 and you don't get much time to do anything about your speed..

It depends, the way that the alert works is so;

Example; you are travaling at 30kph, and the area around you car is 300m, (you in centre), the nav "asks" if there are any loaded pois in the area around the car (every 3 sconds), if the answer is yes, the nav triggers the alert (but only once).

Howerer, if you stop or slow down (or go close to zero kph) or stop, then when speeding up again (and still in target area) then the trigger will sound tha alert again.

Since this is a hack to the OEM system and is non OEM then there will be some things that don't/won't work as you want them.