time for sailing is almost gone so my Laser Fun and Laser St are in the backyard..so time toplay with hardware :thumbup:
Decision made to build a Resler Raiden ..but one question. Why the Raide has four pin and the Rolf Resler just three?? What is the NTCS pin for? :dunno:

Point cleared. No need answer anymore Thx:thumbup:

BMW Dealer parts department, give them the part numbers and they will get some in for you.

Hi everybody... has someone tried the resler raiden (simple) ? any feedback??I just realized mine and I'm going to play with it next weekend.I am willing to use it with my laptop with an USB/COM adapter.Thanks for any feedback/help...

uhmmm...no answer..what is going on???
Well another tech question...what is the best software to use with the raiden resler?
Is navcoder the only chance to monitor ibus???
Thank You

What do you mean by "Raiden Resler"?
Rolf Resler makes 2 types of ibus interface (serial COM PORT and USB)

Both interfaces work with any ibus software

There are a few ibus programmes to choose from:
NavCoder
Ibus Monitor (I think)
Car PC software (various)
etc

the best software will depend on what you want to do:

analyse and understand the ibus, fault find and diagnose faulty ibus devices : NavCoder does that well

Program devices: NavCoder also does that well (focusses on Navigation but also does other things)

>[QUOTE=KiwiJochen;664675]What do you mean by "Raiden Resler"?
>Rolf Resler makes 2 types of ibus interface (serial COM PORT and USB)

I mean the simple interface (the one with the three transistor 2N2222 and not the one with the ICs) and not the one made by Resler.

>There are a few ibus programmes to choose from:
>NavCoder
>Ibus Monitor (I think)
>Car PC software (various)

Thanks I will check it out.

...you can buy a cheap vag kkl usb interface (found 1.99 to 3.99 eur) and use k signal from it (pin 7 on OBD) to ibus line for every software you want (that work with ibus signal) :)

Thank you. I will check as someone told me that there is no Ibus signal on the OBD. So I am not sure about it.
Do you actually mean that I can connect kkl usb interface directly to PC and get the ibus signal?

Muzumesch - thank you

i use a kkl usb interface with navcoder...work like a charm :), successfully changed language and vin to navi, video in motion...etc, btw, this not means you simply connect a vag kkl interface to bmw obd connector and use with navcoder...i've made myself an adaptor to connect into obd plug and use +12v, ground and k line on cd connector from the trunk with navcoder