Most plasma mounts I have seen are very easy to install. Mine took about 30 minutes and you could probably hang your body weight from it.

Do you have an AC outlet below the panel? This product is a quick and easy way to get AC up to the panel as well as your AV wiring: http://www.panamax.com/products.cfm?...il&id=221&ly=h There are several versions of that one, and other brands too.

__________________
Custom X Page | Support Xoutpost!

There must be something pretty amazing in that box for $300!!!

__________________
'08 335i Coupe - Barbera Red / Saddle Leather / Light Poplar Wood / 6spd Manual
Options: Sport, Premium, Cold Weather, Comfort Access, Active Steering (awesome!), Power Rear Shade, IPod Adapter, Navigation w/IDrive
Mods: M6 Wheels, Split Armrest, M-Steering Wheel, Euro Light Switch w/Rear Fog Lights, Short Shift Knob w/Matching E-Brake Handle, Clear Reflectors, CDV, Clear Bra

Retired:'04 X5 4.4i

No kidding, they are proud of that one. I think it is more like $225 online. However, it can be done for 80% less with a quick trip to Home Depot.

__________________
Custom X Page | Support Xoutpost!

You might give Radio Shack a try too...

__________________
'08 335i Coupe - Barbera Red / Saddle Leather / Light Poplar Wood / 6spd Manual
Options: Sport, Premium, Cold Weather, Comfort Access, Active Steering (awesome!), Power Rear Shade, IPod Adapter, Navigation w/IDrive
Mods: M6 Wheels, Split Armrest, M-Steering Wheel, Euro Light Switch w/Rear Fog Lights, Short Shift Knob w/Matching E-Brake Handle, Clear Reflectors, CDV, Clear Bra

Retired:'04 X5 4.4i

Damn...Thanks! However, I should have asked this question years ago.. That would have been perfect, but I dont want to have to knock a wall down or something to route wires like in the pic..

I dont think I have a choice concerning running the power and component wires outside of the wall, so basically I'm just looking for the best way to "hide" them. What are those white skinny boxes that run along the walls in offices to hide telephone wires and stuff? If they came in different sizes, that might work...

Attached Images

 

__________________
Been there...Done that

Even if you do decide to go with one of these boxes, you shouldn't have to knock a wall down to install it. You should be able to snake wires through the wall. That can be a challenge though if you're not experienced, but a decent electrician should be able to do that fairly quickly and easily. Personally, I'd invest in the electrician and a similar solution to those boxes before spending money on conduit - which isn't all that clean-looking either... GL!

__________________
'08 335i Coupe - Barbera Red / Saddle Leather / Light Poplar Wood / 6spd Manual
Options: Sport, Premium, Cold Weather, Comfort Access, Active Steering (awesome!), Power Rear Shade, IPod Adapter, Navigation w/IDrive
Mods: M6 Wheels, Split Armrest, M-Steering Wheel, Euro Light Switch w/Rear Fog Lights, Short Shift Knob w/Matching E-Brake Handle, Clear Reflectors, CDV, Clear Bra

Retired:'04 X5 4.4i

You can buy conduit that is very flat against the wall, and paintable if you wish, to hide the wires on the outside of the wall. Here is some with channels to separate wiring. http://www.hometech.com/techwire/wir....html#SB-WS12T

Installing the boxes like you show is just two cuts on the sheetrock, 5 minutes. Then you fish the wires through. Couldn't be any simpler.

__________________
Custom X Page | Support Xoutpost!

Im searching for your plane tickets as we speak.

__________________
Been there...Done that

I'd do it for a cold beer. Too bad you are across the pond!

I agree with Jay, if you don't want to fool with this just get an electrician to install an AC outlet behind the panel and install a 2" conduit in the wall that exits by your AV gear. I was quoted $250 for this work when I was considering it.

Then all you have to do it buy a good mount.

__________________
Custom X Page | Support Xoutpost!