Xoutpost.com - What did you do to / for your E53 today??

https://petrogen.com/?srsltid=AfmBOo...A56eawT4F_qerE

This makes oxy/acetylene look like MAP gas....[emoji41]

Sent from Embassy network using Tapatalk

EODguy

10-04-2025 10:21 PM

Quote:

Originally Posted by EODguy (Post 1246491)

This morning central lock button working, but the passenger mirror was dipping on reverse EVEN THOUGH the mirror switch was on the passenger side to keep it from dipping and after going to driver's side and back to passenger side it was back to non-dipping mode...[emoji2957]

So I have something that's intermittent... [emoji533] me!![emoji849]

Sent from Embassy network using Tapatalk

Still no joy on finding the issue but now I have a cranking issue (also intermittent) where it acts like the battery is low. I'm replacing the FSR and taking the Witch to a Yemeni electrical workshop to see if they can figure it out.

Sent from Embassy network using Tapatalk

andrewwynn

10-04-2025 10:26 PM

Get a measure of the amps while cranking.

You describe the symptom of end of life starter that pulls more current. It'll sound like low battery when it's the voltage dip from starter taking up to 50-70% more current.

I can't remember if the B+ terminal separates like the 3.0 but occasional thread on xo will have that cause give you that symptom.

–awr–

Using Tapatalk VIP on iPhone

EODguy

10-04-2025 10:38 PM

Quote:

Originally Posted by andrewwynn (Post 1246620)

True, but I still have the no power issues in the obd2, footwell lighter socket, built-in cellphone and switch R (low power) But with this I have some hope that it's connected cause is a wire grounding out doing those issues and draining the battery.

If not maybe someone will steal it and then burn up in an electrical fire, all while I'm collecting my insurance money....[emoji848]

Sent from Embassy network using Tapatalk

andrewwynn

10-04-2025 10:45 PM

Yeah that's likely related.

–awr–

Using Tapatalk VIP on iPhone

Fifty150hs

10-05-2025 12:21 AM

Quote:

Originally Posted by andrewwynn (Post 1246574)

I would just remove the four hub bolts and pull the axle out with the hub.

Replace the outer cv joint or full axle. No point in wasting time: effort trying to pull the axle out of that hub they are the same object now.

–awr–

Using Tapatalk VIP on iPhone

+1 on that. You'll be lucky if it's not permanently rust welded together.

g300d

10-05-2025 04:08 AM

Quote:

Originally Posted by EODguy (Post 1246621)

I know just the place to get that checked then!

https://uploads.tapatalk-cdn.com/202...76ad80e299.jpg

EODguy

10-05-2025 04:25 AM

Quote:

Originally Posted by g300d (Post 1246630)

I know just the place to get that checked then!

https://uploads.tapatalk-cdn.com/202...76ad80e299.jpg

[emoji1787]

Sent from Embassy network using Tapatalk

EODguy

10-05-2025 08:00 AM

This is getting ridiculous!!!

Hard to start and then the AC wouldn't work, like WTF?
Saw the outside temperature showing-35.5c after a bit it climbed back to normal and the AC started working at 4c. Today's temperature was 35c[emoji849]

Sent from Embassy network using Tapatalk
https://uploads.tapatalk-cdn.com/202...d33db4edda.jpg

EODguy

10-05-2025 11:02 AM

Installed a new battery 1000 SAR, bought new ignition switch 100 SAR, ordered new FSR 100 SAR.

Bought some bootleg "water" PRICELESS....

Sent from Embassy network using Tapatalk

All times are GMT -4. The time now is 09:58 AM.

Page 1737 of 1770