^^^Tam is that going in the spare tire well?

And Smokey what are you doing with the prancing horse wheels?

Smokey53, we'll find out. :D

RB, that's going in place of the stock woofer on the right compartment. I haven't cut the round hole yet. Waiting for the subwoofer.
If it doesn't sound good enough, I will modified the stock box by cutting off the face and epoxy a piece of MDF in there, then mount the sub.

In those dimensions it should be okay. Get's to a problem when you have long spans (long continuous box). Bracing helps too, but with that design... I can't see it being a problem. MDF would be "better" but it should be fine.

Just IMHO though. :thumbup:

My 1st mod on the 4.8is .. used GT1 to code the normal ride height down to 'entry mode' height. I may go a touch lower, but will run it this way for a few days and see how it feels.

Trans fluid and filter change.
 

Changed the transmission fluid and filter yesterday. Factory says lifetime on the fluid. I don't know what they consider lifetime but at 111,930 miles, I guess the fluid lived out a long life, too long. It had a color hue between chocolate and road tar. It will be changed in another 50,000 miles.

Unless you did a complete flush, you still have a lot of old fluid in there as a simple drain/refill does not remove/replace all the fluid.

Do it again soon if you just did a drain/refill.

Without a doubt - Although, that's why I prefer underground parking....

Brought my drying racks back home !

http://i1196.photobucket.com/albums/...pspjawqxb4.jpg
http://i1196.photobucket.com/albums/...ps9byynopl.jpg
http://i1196.photobucket.com/albums/...psnoumg1zw.jpg

Brought my drying racks back home !

http://i1196.photobucket.com/albums/...pspjawqxb4.jpg
http://i1196.photobucket.com/albums/...ps9byynopl.jpg
http://i1196.photobucket.com/albums/...psnoumg1zw.jpg

four8, I LOVE your house/property! So amazing!

Is that drying rack for venison?