Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   What did you do to / for your E53 today?? (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/78921-what-did-you-do-your-e53-today.html)

Pekelicious 06-07-2016 04:15 AM

The X was in for a vacuum and...

http://uploads.tapatalk-cdn.com/2016...2bdc2acaa0.jpg

THIS....
http://uploads.tapatalk-cdn.com/2016...97dbd066cb.jpg



Sent from my iPhone using Tapatalk

crystalworks 06-07-2016 04:56 PM

Quote:

Originally Posted by David D (Post 1079763)
Spent yesterday and today taking the interior apart and running cables from the head unit to the rear in preparation for the new stereo system. I took out both front seats, the back seat, the console, the glovebox, the rear side panels... God, I'm tired! Thanks Crystalworks for the awesome write up you did on your stereo install. It was an enormous help!

Glad it helped you out. Nothing really difficult about the process, just extremely tedious and time consuming. :thumbup:

I'll be doing that again in my 4.8is as soon as I recover from our forced kitchen remodel (house flooded) and can afford another Avin. :(

squidzilla 06-07-2016 10:57 PM

Quote:

Originally Posted by crystalworks (Post 1079924)
Glad it helped you out. Nothing really difficult about the process, just extremely tedious and time consuming. :thumbup:

I'll be doing that again in my 4.8is as soon as I recover from our forced kitchen remodel (house flooded) and can afford another Avin. :(

Woah. The seats have to come out to do that? Good to know, I will plan on using my carpet cleaner to detail that part while it is torn up.

phathom 06-08-2016 04:41 PM

Installed 20W LED angel eye bulbs to replace the 3.5W bulbs I had previously put in to replace my blown stock bulbs.
The bulbs https://imgur.com/MpZO6dq
Daytime comparison https://imgur.com/j555e2o

4.8iS Le Mans_NZ 06-08-2016 05:39 PM

Quote:

Originally Posted by Pekelicious (Post 1079862)
The X was in for a vacuum and...
THIS....
http://uploads.tapatalk-cdn.com/2016...97dbd066cb.jpg

Hmmm....might have to do this soon on my passenger door handle, which requires an extra good pull to open from the outside.
What causes the issue? Is it corrosion/wear of the carrier mechanism, cable stretch, or a combination of these?
Edit: Also, should I buy the Febi-Bilstein carrier, or the genuine BMW item?
The FB part is less than half the price of the OE carrier.

Pekelicious 06-08-2016 07:35 PM

Quote:

Originally Posted by 4.8iS Le Mans_NZ (Post 1079980)
Hmmm....might have to do this soon on my passenger door handle, which requires an extra good pull to open from the outside.
What causes the issue? Is it corrosion/wear of the carrier mechanism, cable stretch, or a combination of these?
Edit: Also, should I buy the Febi-Bilstein carrier, or the genuine BMW item?
The FB part is less than half the price of the OE carrier.

the carrier broke near the spring part, found out after removed the carrier. for the time being i just got an aftermarket carrier. i ship all my stuff from US or portugal cuz prices here at the stealership are like tickets to go to Mars:rofl::rofl::rofl:... just so you get a pic the fuel filter costs 300USD:wow::wow::wow:

puddinboo 06-08-2016 08:47 PM

fuel filter ,wow thats nuts

crystalworks 06-09-2016 12:32 AM

Quote:

Originally Posted by squidzilla (Post 1079939)
Woah. The seats have to come out to do that? Good to know, I will plan on using my carpet cleaner to detail that part while it is torn up.

No, it doesn't have to really. I just like to route all my wiring along the factory wiring paths and under the factory clips, carpets, etc. Even go so far as to wrap it in Tesa tape (BMW factory wiring tape) usually. It's an OCD thing that I have realized forces me to take 10x longer to do things than everyone else. Sometimes the result is better... and other times it was just a huge waste of time. :D:rofl:

TiAgX5 06-11-2016 10:24 AM

Tearing into the front driveshaft/Xfer case job today.

Will find the cause of hard acceleration ratchet sound, order parts, correct issue.

richardb 06-11-2016 10:37 AM

the vanos rattle has started...

https://www.youtube.com/watch?v=zAyQBiV5GbI


All times are GMT -4. The time now is 09:57 AM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.