No sweat T, you are a wealth of information though at just a bit over 2k posts! I still have yet to crack 1000!

Ricky, you are in nj - are you coming for the Bimmerfest East in md? last year it was a lot of fun...:thumbup:

when is it? Would love to get the X cleaned up and take a trip down to MD on a nice weekend! Hell we might even come down on the Triumph and leave the X at home! haha

here is the post:

http://www.xoutpost.com/off-topic/xo...istration.html

Well, I hooked my tails up and the running lights didnt work. I followed what RickyBobby did here http://www.xoutpost.com/863406-post50.html and swapped some pins. Now the running lights work but the pass side flickers really bad and the driver side only slightly. I dont have them installed just sitting in the back plugged in.

did you try the capacitors out from lightwerkz? I think us 03 guys and the facelift guys need them because we have adaptive brakes, I emailed [email protected] and he sent them out for 20 bucks, they plugged right in, i couldn't tell you if i had flickering without them because I installed the tails with the capacitors.

the flickering can be turned off for cold monitoring... the PMW - is a different story... there is a line in the programming, that activates LED tails - it has not been tested yet... maybe it eliminates the flicker? i don't have LED tails, so i can't test it myself...

damn :-( Well that just pissed on my day. Guess I gotta go switch back the wires and use the stockers for now. :(

I'm telling you get those capacitors from Lightwerkz and you'll be fine. Otherwise you need to do coding like Terminator did above.

I was also getting the *check rear lights* error. The caps I assume will eliminate those as well? Also I don't see them on their site. Are these special parts I have to ask for?



*edit* I just emailed them. just waiting for a response.