Hi Jeff, what are the updates in Dynos 1.2.0 firmware? The Dynavin website seems to indicate it has support for Siri but is not clear what else it contains or addresses.

a bunch of little stuff thats mostly behind the scenes but the main thing is the Siri and 'ok Google' voice integration

Cant wait to get mine!

Anyone installed this on a X5 with factory NAV and non-DSP? Have any issues with the harness or remote turn on wire for the stock alpine amp?

I installed an Avin with that setup (04 X5 Nav no DSP) and had no issues. Needed the extension cable, but no big deal. I assume it would be the same for the Dynavin.

I updated the firmware and now my phone volume is super loud. Not sure what happened here. Before it used to be lower than the music volume,now it is much higher. I have an e53 with dsp running 1.2.0

I finally got around to installing the system. Took waaaay longer for me to do than originally thought because I tried to be meticulous with everything (and I've never really done this kinda install before). Everything works that I WAS able to connect, but I have some adapters and such coming to me so I can finish up some of my nuanced bits of my install. I'll have to go for the reverse camera install and subwoofer upgrade another time. Much left to do, but at least I have Nav and Bluetooth and all that jazz again.

FYI - if it's not been said anywhere yet, the mic in the kit has a 2.5mm plug, and not the standard 3.5mm everyone is used to for headphones. I'm reusing a mic that the previous owner installed with the parrot system I removed, so I'm waiting for a 3.5mm to 2.5mm adapter. I'll just have to pull the Dynavin and plug in the adapter and the mic should work.

I have factory nav also, and want to install an eonon unit. Can i remove the old harness? Because someone wants to buy my 16:9 screen and mk3.. and he asked for the harness as well

You can but imagine it would be a little bit of a bitch and you'd be removing your interior to get to it. I put the Eonon in mine and selling the stock NAV DVD. My boardmonitor has some bad pixels.

It would be pita offcourse.. but still need to drop a cable for my 2nd amp for subwoofer in the back.
Would it be that much more work to remove the harness? If yes the buyer just has bad luck haha