Thanks for posting. I am going to order the cable now.

Thanks for the info AZ.

Has any of you seen the size of that instruction PDF.. It is crazy long. I thought it would simple hack in get out, but there is whole lot you have to do.. I am afraid of bricking my BMW.

Thanks a lot for all the info. I just got my cable, too.

I need to change my radio frequency to show even numbers though. Do you guys have any clue if we can do this with the NCSExpert software and this cable?

Thanks again

Smiler51

Got the cable and the installation seemed to go well. However, I can not find the E70 in the menu. What am I doing wrong? Thanks!

In the menu of what?

You need an FSC code to activate the sirius functionality. Contact [email protected]

It's in the Inpaload start menu . We got F1 to F10 listing all models except the E 70. I just downloaded a newer version today. Hopefully it will help.

Ok this is how far I got. The car is communicating with the Laptop, both black dots are on, and the VIN loads in the NCS expert. Before I proceed, (I am very careful here) a few questions to the experts:

-In the Inpaload menu there a lots of models under F3-F9 but no E70. (as shown in the instruction PDF where the writer chooses the E90) Will this be an issue later on?

-I am working with an E70 2010 Diesel. I did download the v41 daten files but I am not sure if I need to copy and paste them for the 2010. Any ideas?

Thanks in advance.

^^ Don't worry about doing the airbag tests, INPA doesn't have the E70 by default. There is a file called laden.bat, run that to update your daten files. You will still need to copy files manually to 3 subdirectories though.

Has anyone done a step by step instructions for 2012 E70 LCI? The instructions in the PDF is vague when it comes to picking the right file/mode, and I wouldn't want to mess anything while trying to cancel the amber lights.