|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#122
12-01-2014, 03:15 PM
|
||||
|
||||
|
Quote:
__________________
 Xoutpost.com - where you come for the information but stay for the friendships 
|
|
#123
12-01-2014, 05:18 PM
|
||||
|
||||
|
Quote:
You would need more than what is said on here , example : fenders , bumper . Pretty much a full front end convention since the lights only fit e70/71 M & x6 Sent from my iPhone using Tapatalk
__________________
 "This is My X5 there are many like it but this one is mine"
|
|
#126
01-30-2015, 04:33 PM
|
|||
|
|||
|
can u please email me instruction and part number for retrofit harness to [email protected]
thanks in advance
|
|
#127
01-30-2015, 04:44 PM
|
||||
|
||||
|
Quote:
__________________
Xoutpost.com - where you come for the information but stay for the friendships
|
|
#128
02-02-2015, 10:57 PM
|
||||
|
||||
|
330 ZHP and folks who have done this retrofit, I just purchased a set of these lights on eBay. They are ECE pattern, so will be curious to see how they compare to our DOT pattern (there's been discussion on DOT vs ECE for years)
Anyway, in another thread you mentioned you had two wires coming into the interior that you didn't know what to do with - a black/green, black/blue). Did you end up just taping those back, or did you find where they went? You also noted the Adaptive Cornering Control (I believe that is when the foglight comes on?) something to do with SA524 which is the option code for Adaptive COrnering...did you get that sorted out? I have a 2012 X6, which I believe has a FRM 3, so I should be good with not having to replace it. Chris Last edited by Chris F.; 02-02-2015 at 11:53 PM.
|
|
#129
02-03-2015, 03:02 AM
|
|||
|
|||
|
I did just tape off the unneeded wires.
I do not know about the differences for the light patterns for the E70 LED headlights specifically. My guess is the defined (__// up to the right light spread???) For the X6M and X5m there isn't any foglights - so the adaptive movement is within the headlights and is controlled under $524 for the xenon light housings. Once you add $552 and remove $524 and $522 in the VO the coding is complete. This is of course after you have properly installed the harness and you have the latest FRM3. My X5 is a mid 2012 build and I had to replace my FRM with the last version and code it with the VO. Only then would everything work 100% properly. Please provide the part number of your FRM3 mine had the 252 part number and I had to swap in the 375 part number 01 Footwell module 3 1 04/2013 61359287252 ENDED 01 Footwell module 3 1 61359308375
__________________
 /_________\ OO=[][]=OO
|
|
#130
02-03-2015, 03:04 AM
|
|||
|
|||
|
btw - the adaptive headlight on the E7x only controls light movement based on load on the vehicle and the direction of the steering input...
It is NOT the later (first avail on 7er) control over the lighting to place oncoming traffic in a "blind spot" of lighting
__________________
/_________\ OO=[][]=OO
|
|
| Bookmarks |
|
|
|
|
Linear Mode
