|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#28
08-31-2016, 04:59 PM
|
|||
|
|||
|
Maybe I'm missing something, but I have a 3.0i and changed filter and fluid last month and didn't even have to jack it up, let alone using stands. I did use a scissor jack to support the pan after removing the last few bolts. FYI, even with the pan "drained", there's still about half a quart of fluid remaining as the drain plug boss sticks up inside the pan about 3/8 off the floor. I'm sure the video tells you, but remove the fill plug *before* you remove the drain plug.
I used one of these to refill: Oil Suction Gun - Save on this Suction Gun at Harbor Freight Fluid of choice for me is Valvoline Maxlife ATF full synthetic. Did a fluid/filter change at 80k and again at about 154k, same fluid both times. Still shifts like the day I bought it. Having now said that, it will probably die on me tomorrow, lol.
__________________
12 E70 3.5i xDrive 03 E46 330i ZHP 01 E53 3.0i 98 E36 323is 12 Audi A4 Quattro 79 Triumph Spitfire 73 MGB 
|
| Bookmarks |
|
|
|
|
Threaded Mode
