|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#12
10-10-2018, 06:17 PM
|
|||
|
|||
|
Hey Guys, I'm actually having a similar issue with my ABS and traction control lights being on along with the ( ! ) mark.
My buddy scanned my 03 X5 4.6is and got the following codes 81 Druck Sensor Leitungsunterbrechung error frequency : 255 ASC - nicht passiv geschaltet ABS - regelung passiv BLS - nicht betaetigt ASC - regelung passiv ACB - passiv HBA - passiv ECD - passiv HDC - passiv 108 SN-Ueberwachung Error frequency : 248 Fahrzeuggeschwindigkeit ASC - nicht passiv geschaltet ABS - regelung passiv BLS - betaetigt ASC - regelung passiv ACB - passiv HBA - passiv ECD - passiv HDC - passiv 105 Bremslichtschalter Plausibilitaet Error Freq : 238 Fahrzeuggeschwindigkeit ASC - nicht passiv geschaltet ABS - regelung passiv BLS - nicht betaetigt ASC - regelung passiv ACB - passiv HBA - passiv ECD - passiv HDC - passiv Needless to say, regrettably I don't speak German and I'm really hoping it isn't my ABS module. I had just replaced my pads and rotors and had compressed the pistons to install the new pads which overflowed the brake fluid resivour. I'm not sure if that had anything to do with it but I'm describing whatever i can think of. I replaced the brake pad wear sensor also. I'm hoping you guys can help as we're now going into winter and not having traction control or ABS might suck...
__________________
 If you can still see the disapointment on his face in your rear view mirror, he's not far enough behind. 98 M3 Sedan blk/blk Sold 00 BMW 540i Sold 03 BMW 4.6IS 98 BMW E36 M3 modified 
|
|
#13
10-10-2018, 08:33 PM
|
||||
|
||||
|
Google Translate says: -
81 Pressure sensor line interruption error frequency: 255 ASC - not switched passive ABS control passive BLS - not activated ASC control passive ACB - passive HBA - passive ECD - passive HDC - passive 108 SN monitoring Error frequency: 248 vehicle speed ASC - not switched passive ABS control passive BLS - operated ASC control passive ACB - passive HBA - passive ECD - passive HDC - passive 105 Brake light switch Plausibility Error Freq: 238 vehicle speed ASC - not switched passive ABS control passive BLS - not activated ASC control passive ACB - passive HBA - passive ECD - passive HDC - passive Looking at this, I dare say that a couple of these could be due to the overflowing master cylinder reservoir....  The brake light switch is a good place to start - (easy, cheap) - then move on the other harder (more expensive) items. 
__________________
Wayne 2005 BMW X5 3.0d (b 02/05) 2001 BMW F650GS Dakar (b 06/01) 
|
|
#14
10-10-2018, 10:55 PM
|
|||
|
|||
|
Thanks for your input. I know i have a brake light bulb out on the passenger side which I have to replace. I drained a bunch of the brake fluid out of the resivour. We tried to erase the codes but they wouldn't erase.
__________________
If you can still see the disapointment on his face in your rear view mirror, he's not far enough behind. 98 M3 Sedan blk/blk Sold 00 BMW 540i Sold 03 BMW 4.6IS 98 BMW E36 M3 modified
|
|
#15
10-10-2018, 11:06 PM
|
||||
|
||||
|
There is an error that says the pressure sensor is not working. Nothing abs related will work without pressure feedback
Sent from my iPhone using Tapatalk Pro
__________________
E53 / M54 2001 3.0i gas LHD (pair of them: his & her)
|
|
#16
10-10-2018, 11:18 PM
|
||||
|
||||
|
Quote:
__________________
Wayne 2005 BMW X5 3.0d (b 02/05) 2001 BMW F650GS Dakar (b 06/01)
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
|
|
Linear Mode
