|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#51
|
|||
|
|||
I found another thread and read all the replies in there. I think I found my answer. e LED is fine on turn signal wire with low beam off When i turn on low beams, something must be going that is feeding a different PWM on th the turns as the LED fritzes out I'm thinking with lows off, and it's just full on 12V when u engage the turns. With the low beams on, the 12V PWM is cycling on the turn signal wire. Last edited by jsoto; 01-10-2019 at 09:27 PM. |
Sponsored Links | |
|
#52
|
|||
|
|||
i think the answer is right in front of me all this time
The same way caps are used to smooth out the V fluctuations in the rear, same caps to be inline between turn/amber trigger on switchback led |
#53
|
|||
|
|||
LED Bulbs for tails
Lightwerkz makes them for the tail lights and it's what I used to make them stop flickering in my with aftermarket full led tails.
Sent from my iPhone using Tapatalk Pro
__________________
2005 Imola 4.8iS |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|