|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
04-22-2019, 11:07 AM
|
|||
|
|||
|
Vacuum pump o-rings
Hey guys, I’m not having any issue finding the o-ring that mates the pump to the block, my question is where can I find the o-ring that mates the cover to the pump!
I’m finding 11667509080, which is also on RealOEM, but nothing else. Thanks 
|
|
#2
04-22-2019, 11:49 AM
|
||||
|
||||
|
__________________
2004 BMW M3 Individual 2009 BMW E70 X5 35d 2011 BMW E70 X5 35d - Totaled 2009 BMW M3 E90 - SOLD 2006 E53 X5 4.8iS - SOLD 2002 E46 M3 Convertible - SOLD 2006 E46 M3 ZCP - SOLD 2011 E70 X5 35d - SOLD 2000 E39 ///M5 - SOLD 2003 E53 X5 4.6iS - SOLD 2006 E83 X3 3.0i MSport - SOLD 2000 E46 323Ci - SOLD
|
|
#3
04-22-2019, 12:04 PM
|
|||
|
|||
|
Someone on eBay sells both together as a kit...
Goes by Al Hafner Tuning on eBay. Easy to find with a quick eBay search. I can't access eBay from work, so cannot provide a link...but kit worked well for me. 2k miles in
|
|
#4
04-22-2019, 12:16 PM
|
|||
|
|||
|
Awesome - thank you guys!
|
|
#5
04-22-2019, 05:44 PM
|
|||
|
|||
|
Here you go. It's the one i bought for the e70 and e53.
https://rover.ebay.com/rover/0/0/0?m...2F302213656532
__________________
2005 Imola 4.8iS
|
|
#6
04-22-2019, 06:02 PM
|
|||
|
|||
|
Quote:
Thank you sir!! I actually ended up snagging the Dorman kit from my local Autozone of all places and for $21.57 to boot Should be here tomorrow. - I couldn’t believe they had it... not that they’re necessary, but it came with new bolts as well.
|
|
#7
04-22-2019, 06:05 PM
|
|||
|
|||
|
I honestly looked everywhere, started on RealOEM and then went to FCPEuro and ECS and found very little... Then you guys popped in and all of a sudden I found them everywhere! Was the craziest thing... that said... I guess it helps when you know what your looking for.
Appreciate the help!!
|
|
#8
04-24-2019, 10:00 PM
|
|||
|
|||
|
Don’t have to buy some “kit”, those are unnecessarily marked up. Ring up your local engineering shop and ask if you can buy a couple of o-rings. Viton based. BMW uses BUNA-N which doesn’t have as long of a service life.
The seals are 94mm ID x 3mm wall (inside pump) and 55mm ID x 2.5mm wall (outside pump).
|
|
#9
04-24-2019, 10:43 PM
|
|||
|
|||
|
I know, the 55mm was .88 cents on FCPEuro... but the 94mm (didn’t know the dimensions at the time) was no where to be found.
Being I already have the kit and have torn in to it, I’ll take it on the chin this time and keep this archived for any future needs. Great info to have for sure, thanks FourPointEight-is!
|
|
| Bookmarks |
|
|
|
|
Hybrid Mode
