LED Lights from Zomk Speed - need Help

[mrbmwx5]

Ok here the problem
On my 01 ( 1 2 3 4 5 6 ) 1 and 6 are empty and the #2 goes to Red , 3 goes to Yellow, 4 goes to Green , 5 goes to Black

[Philly X5]

Originally Posted by mrbmwx5

Ok here the problem
On my 01 ( 1 2 3 4 5 6 ) 1 and 6 are empty and the #2 goes to Red , 3 goes to Yellow, 4 goes to Green , 5 goes to Black

Thanks Man! I will try that first thing tomorrow morning

I really hope they will work. I really like the "New X5 look" now & don't want to go back to the old...

[jst2878]

put the 1 into the 3 and your good to go. if thats not it than move the 1 and 2 over one. if you have a meter that will work for sure. thats your problemo

[Philly X5]

Originally Posted by jst2878

put the 1 into the 3 and your good to go. if thats not it than move the 1 and 2 over one. if you have a meter that will work for sure. thats your problemo

Thanks!!!

If that will work I owe you

[Philly X5]

Ok, the lights are working but they flickering like a Christmas tree...what da @#$%

Any one knows if its possible to fix that or should I just send them back and try another company or just forget about the Led's

[mrbmwx5]

You need this to make it work
Look for this item RL-650 Tail Light Load Resistor kit
Product Listing - CAR

[Philly X5]

Crap, I just ordered some leds from them yestreday...

So Do I need one RL-650 for each led light? Do you have any info on how to wire it? Thanks.

[mrbmwx5]

Originally Posted by Philly X5

Crap, I just ordered some leds from them yestreday...

So Do I need one RL-650 for each led light? Do you have any info on how to wire it? Thanks.

You need two, one for each light and it even come with instruction.
If you run into problem how to wire them in let me know i'll help you with it.

[Philly X5]

Originally Posted by mrbmwx5

You need two, one for each light and it even come with instruction.
If you run into problem how to wire them in let me know i'll help you with it.

Thanks.

[Ldiggs910]

Originally Posted by mrbmwx5

You need two, one for each light and it even come with instruction.
If you run into problem how to wire them in let me know i'll help you with it.

I tried to put led turn signals bulbs in but they caused the fast-flash, blown bulb warning. They looked AMAZING though with the led tails. I bought load resistors and wired them in series and in parallel with the two-wire turn signal bulb socket. The bulb wouldn't work in either case. I tried this with a 25w and 50w resistor. Can you help me?

I pretty much gave up and bought the stealth bulbs but I would love to have completed this mod.