Coding, what not to forget?

[jgold47]

Originally Posted by TerminatorX5

Just tested:

PWM_FL_BIX
wert_02 => change to => wert_01

in LCM module

high beam bi-xenon together with regular high beams

working fine


EDIT: coupled with simultaneous front fog lights, I have all 6 front lights shining at the same time!!!

so how does this work?

normal high beams are the xenons with the covers up.
flash to pass are the h7's in the inner bowls

when you pull flash to pass, do both light up (h7's and xenon's)?
when you push to go to high beams then are both lit?

[TerminatorX5]

daytime, no front lights are on - flash the stalk, center highbeam halogen lights flash

daytime, no front lights are on - push the stalk, nothing happens.

nighttime, xenons (low beams) are active, front fog lights are on - flash the stalk, center highbeam halogen lights flash, xenon lights remain on, bi-xenon shield is Not activated, front fog lights remain on

nighttime, xenons (low beams) are active, front fog lights are on - push the stalk, center highbeam halogen lights come on, xenon lights remain on, bi-xenon shield is activated, front fog lights remain on

[jgold47]

Originally Posted by TerminatorX5

daytime, no front lights are on - flash the stalk, center highbeam halogen lights flash

daytime, no front lights are on - push the stalk, nothing happens.

nighttime, xenons (low beams) are active, front fog lights are on - flash the stalk, center highbeam halogen lights flash, xenon lights remain on, bi-xenon shield is Not activated, front fog lights remain on

nighttime, xenons (low beams) are active, front fog lights are on - push the stalk, center highbeam halogen lights come on, xenon lights remain on, bi-xenon shield is activated, front fog lights remain on

thats pretty much perfect.

will be doing on saturday.

I think I am turning my side markers back on. Just not comfortable driving around without. I dont see any other cars without them, and I dont want some cop getting excited.

[jgold47]

Originally Posted by jgold47

thats pretty much perfect.

will be doing on saturday.

I think I am turning my side markers back on. Just not comfortable driving around without. I dont see any other cars without them, and I dont want some cop getting excited.

wait - I just looked at the lsz dump from a couple of pages ago, and I dont have this in my module? Is it possible its an older code?

[TerminatorX5]

Originally Posted by jgold47

thats pretty much perfect.

will be doing on saturday.

I think I am turning my side markers back on. Just not comfortable driving around without. I dont see any other cars without them, and I dont want some cop getting excited.

i played with front sidemarkers, and still prefer them to be off - in daytime, no lights are on, at night the xenons are on - the parking lights are not on by themselves when the switch S8 is in auto position. if somebody can't see the xenons shining, then we have other problems than the front parking lights

[jgold47]

Originally Posted by TerminatorX5

i played with front sidemarkers, and still prefer them to be off - in daytime, no lights are on, at night the xenons are on - the parking lights are not on by themselves when the switch S8 is in auto position. if somebody can't see the xenons shining, then we have other problems than the front parking lights

did you see my other note? I dont seem to have the PWM code in my lsz. Could it be something else?

[TerminatorX5]

Originally Posted by jgold47

did you see my other note? I dont seem to have the PWM code in my lsz. Could it be something else?

I just saw this post... interesting... what post number is your dump?

[SlickGT1]

I think it's because term pulls the data from all his modules. Not the individual ones.

[jgold47]

Originally Posted by SlickGT1

I think it's because term pulls the data from all his modules. Not the individual ones.

do you think that in another module then?

Term, look back on page 14 or 15 or so.


Slick, did you use a different line?

[TerminatorX5]

i found your post... interesting... i'll try to find out to see which module has it... anyone else tried this line? Slick, did you get that function coded? which module was that line?