Coding, what not to forget?

[SlickGT1]

Originally Posted by patrickkc

After you chose GM3, and press f4 again, a txt will open with bunch of HEX in it. Close that, and go to your WORK folder and open the .TRC file. Save it as a .MAN file, and change w/e you need. Save it again as a .MAN file.. then you F5, coapiReadSgGetFSWPSW, F2, SG_CODIEREN, and hit F3 to start coding. It will say coding ended after its finished.

Is this where my problem is.
After I choose gm3, I press job, change I read, then press F3, which is execute job. Should I be pressing f4.

[fmugur]

Slick, you might already read this but if you haven't then go over it. Beside I got from you guys here on this thread I used the info from the following link when I did mine today.
Dummies Guide to Basic coding with NCS Expert - Bimmerforums - The Ultimate BMW Forum

[fmugur]

Originally Posted by jgold47

last post...

this site has the trace files for an 02 e46 318. not perfect, but most of the options are the same between the cars....

NCS-Expert - Brief walkthrough and available parameters 2002 E46 318i CKD

Great info.
How can I tell what functions are in a module. I exported a few modules but if I know the function how do I know which module should I make the changes to?

In this particular example you mentioned LSZ module but I cannot find it in the list.

[SlickGT1]

ok, damnit, Josh put me on the right track. I got it. I can't choose ews when selecting to read vin. I have to use KMB. Then I get the individual module. I think this is going to work. Thanks guys.

[SlickGT1]

Update. It worked. I choose KMB for the vin readout. Then my file completes without error. I edited the gm3 and was able to upload it back.

My windows now roll back up. Yay. Yay. Woooohoooo.

I guess I now have to edit the lcm for the lights stuff.

Thank you all. Especially Josh for the email support. Had he not told me my file was for the whole car, I wouldn't have figured it out.

[SlickGT1]

Update List.

1. fogs on w/ hi beams
-FL_UND_NSW_NICHT_GLEICHZ - nicht_aktiv
A. Fog lights with Highbeam Flash
-LH_UND_NSW_NICHT_GLEICHZ - nicht_aktiv
2. hi beams on with low beams
3. disable corner/parking lamp
-BLK_V_GED_ALS_PARKLICHT
4. disable seat belt chime
5. double flash hazards
6. window/roof close with remote GM3 - done.
KOMFORTSCHLIESSUNG_FB - activ
7. cold monitoring off. Angel Eyes and License Plate
-KALTUEBERWACHUNG_KZL - aktiv
lic plate cold monitoring - needs to be set to nicht_activ - NOT TESTED
-KALTUEBERWACHUNG_SL_LV - Angel Eyes
-KALTUEBERWACHUNG_SL_RV - Angel Eyes
8. I wish we could close the mirrors with lock.
-SPIEGELEINKLAPPEN - aktiv (not tested)
9. Sync time with GPS.
-GPS_UHR - aktiv
10. Nav disclaimer off
- LAENDERVARIANTE_GT setting: ece
11. 1 click unlock after shutting car off...all 4 doors unlock
12. euro hazards
13. door gong
14. key gong
-ZUENDSCHLUESSEL_WARNUNG
15. seatbelt gong
-GURTWARNUNG_GONG
16. real speed on speedo
17. wiper goes back down after engine shut off

[fmugur]

We probably have to get the list grouped by module. Most likely the lights options are in LCM but what about the others. I guess I can print each module options and look in each file for a specific option.

[SlickGT1]

Yup, if you notice, I put gm3 for the windows.

I will do the LCM tonight, I hope.

The other stuff, we will have to fish for, seems like getting help in this area of e53 is tough. Very few people know it and are willing to help. Fewer people that are willing to help, but don't remember it all. So it looks like we will have to at it with the bunch of people in this thread. But that list above is is what is confirmed to work.

[SlickGT1]

For those that convert to springs from airbags.

This has to be removed from SA
0220 00000000 0000000000000200 0000000000 1 NIVEAUREG //Level control system //Niveauregulierung
0221 00000000 0000000400000000 0000000001 1 LFEDER_2_ACHS //2-axle-air springing //2-Achs-Luftfederung (nur in Verb. mit High-Kombi)

SLS Inactive Message.
GM3 module,
NIVEAUREG - Nicht_Malden

[SlickGT1]

Wipers will complete and goto end position after turning engine off

Module: 2JBBF or JBBF, not tested, just research.
Value: ZYCLUS_VOLLEND_KLR_AUS