Coding, what not to forget?

[TerminatorX5]

and i will float your your key on the river!!!! hahaha

on the line that i posted for high beams at the same time as bi-xenon - the line reads PWM - pulse width modulation... i am not so sure if that line will do what i said it will do - but there is no other lines that i could find for the bi-zenon and the high beams... might be part of the cold/hot monitoring - so, cross check that entry, if possible...

i think, i found some lines that might allow for the AE to be on with the engine running but i need to get my laptop in order before testing my theory - my kid got hold of the computer again and played some online games... lol...

[tmv]

Subscribed.

[SlickGT1]

Originally Posted by TerminatorX5

and i will float your your key on the river!!!! hahaha

on the line that i posted for high beams at the same time as bi-xenon - the line reads PWM - pulse width modulation... i am not so sure if that line will do what i said it will do - but there is no other lines that i could find for the bi-zenon and the high beams... might be part of the cold/hot monitoring - so, cross check that entry, if possible...

i think, i found some lines that might allow for the AE to be on with the engine running but i need to get my laptop in order before testing my theory - my kid got hold of the computer again and played some online games... lol...

Thanks man. My nephew got hold of my pc once. Also played some online games. My PC took 20 hours of repair to get back in order. Ended up straight up formatting it after 18 hours of trying to figure out WTF.

Keep this going. I am going to try and maintain that list of function and line.

I will also probe the dude that does the programming to see if there are any other lines that we missed.

[TerminatorX5]

this is my FSW file, original...

[SlickGT1]

Update List.

1. fogs on w/ hi beams
-FL_UND_NSW_NICHT_GLEICHZ - nicht_aktiv
2. hi beams on with low beams
3. disable corner/parking lamp
-BLK_V_GED_ALS_PARKLICHT
4. disable seat belt chime
5. double flash hazards
6. window/roof close with remote
KOMFORTSCHLIESSUNG_FB - activ
7. cold monitoring off. Angel Eyes and License Plate
-KALTUEBERWACHUNG_KZL - aktiv
lic plate cold monitoring - needs to be set to nicht_activ - NOT TESTED
-KALTUEBERWACHUNG_SL_LV - Angel Eyes
-KALTUEBERWACHUNG_SL_RV - Angel Eyes
8. I wish we could close the mirrors with lock.
-SPIEGELEINKLAPPEN - aktiv (not tested)
9. Sync time with GPS.
-GPS_UHR - aktiv
10. Nav disclaimer off
- LAENDERVARIANTE_GT setting: ece
11. 1 click unlock after shutting car off...all 4 doors unlock
12. euro hazards
13. door gong
14. key gong
-ZUENDSCHLUESSEL_WARNUNG
15. seatbelt gong
-GURTWARNUNG_GONG
16. real speed on speedo
17. wiper goes back down after engine shut off

[TerminatorX5]

Dennis, did you get it already done, or you are jsut recapping the list?

[Ricky Bobby]

Originally Posted by TerminatorX5

LED_RUECKLICHT_OPTION
nicht_aktiv

it says tail light LED - not active.... i wonder, if this will resolve LED flickering while ON for retrofitted LED taillights if set to activ....

would like to know, someday my startup flicker will be coded off with my tails

[TerminatorX5]

i think this one resolves the ongoing flickering with the adaptive brakes.. the start up flickering is under the cold monitoring... however, not tested...

[SlickGT1]

Just adding to the list of what the guys in NJ coding meet were able to do. I know a guy actually in SI that turns out has coded over 4000 cars. So I might head out there soon to get this all taken care of. I'll let you know how it goes once done. I just want to make sure I have a full list of stuff to do.

[TerminatorX5]

Slick, i found an E90 in Manhattan for my wife, 2011, under 5K miles... is it safe to get the car from that area? or should I steer away? the deal is backed by BMWFS... how can I tell if the car was flooded but then cleaned up?... obviously, if it si dripping water, i would know.. but, if it was cleaned up?...