Coding, what not to forget?

[SlickGT1]

Also another thing to try,

Did you notice that we have

BLK_DIMMUNGS_OPT_1 = TURN SIGNAL DIMMING OPTION 1 - nicht_activ
BLK_DIMMUNGS_OPT_2 = TURN SIGNAL DIMMING OPTION 2 - activ
BLK_V_GED_ALS_PARKLIGHT = DIMMED FRONT TURN SIGNAL AS PARKLIGHT (i made this nicht_activ)

Now I am curious what the dimming option 1 does. Maybe it turns on the turn signal only with the lights being in auto, or position 2. While option 2 turns on the corners in every position but zero.

ADDING THE FOLLOWING JUST TO HAVE ALL THE TURN SIGNAL OPTIONS IN ONE POST
BLK_V_GED_ALS_SIDEMARK - Dimmed front turn signal as side marker - activ CURRENTLY
BLK_V_GEDIMMT_ALS_ERSATZ - Dimmed front turn signal as replacement light - activ CURRENTLY

[X5SND]

Wow, thanks guys really appreciate all the info thus far! Im looking at this stuff still trying to discern what I'm about to get myself into (in a good way though)!! Although I'm not going to tinker with this stuff till probably later next week, I want to figure out a plan of attack/place to start with regards to coding lights!

[jgold47]

Originally Posted by SlickGT1

Right I was looking at that too. This is what I came up with.

STANDLICHT = SL = PARKING LIGHTS

VORNE = AHEAD

INNEN = INNER

ALS - AS

The issue is I can't figure out what TWL stands for. I guess nothing left to do but try it.

LH = LEFT REAR
LHI = LEFT REAR INNER
LV = FRONT LEFT
RH = REAR RIGHT
RHI = REAR RIGHT INNER
RV = FRONT RIGHT.

So when the two are side by side, L = Left, V = Front, R = Right, H = Rear, I = Inner.

Now what about UEBERSPG_ABSCHALT_SL_H - nicht_activ on mine. I think this is Overvoltage OFF Parking light Rear

SL_VORNE_ALS_ZUSATZ_BLK - wouldn't this make the AE blink as turn signals?
SL_INNEN_ALS_TWL = This translates to Parklight inner as (TWL) WTF is TWL? I think we need to try this one first.


================================================== =======
Side note, my car FL_DIMMUNG_ALS_DRL is wert_06, my drls are off.
GED_FL_ALS_DRL is nicht_activ as well.

SL_VORNE_ALS_ZUSATZ_BLK - wouldn't this make the AE blink as turn

except that it says parking light in the description. so we get back to that nomenclature thing.

SL_VO sure feels like the AE's but it says parking lights.

Oddly, I thought you told me to turn off

BLK_V_GED_ALS_SIDEMARK - to get the front turn signals off, but I am showing it as active? so now I am confused what I used to turn off the turn signals.

[SlickGT1]

I have a feeling you are looking at your original file, and not the modified man file. Run ncs again and get the current file from there. I bet it's nicht_activ on that line.

[TerminatorX5]

FL - HIGH BEAMS (L-LEFT; R-RIGHT)
NSW - FRONT FOG LIGHTS (L-LEFT; R-RIGHT)
AL - LOW BEAMS (L-LEFT; R-RIGHT)
BL - BRAKE LIGHTS (L-LEFT; R-RIGHT; M-MIDDLE)
BLK - TURN SIGNALS (LH-REAR LEFT; LV-FRONT LEFT; LZ-SIDE LEFT; RH-REAR RIGHT; RV-FRONT RIGHT; RZ-SIDE RIGHT)
KZL - LICENSE PLATE LIGHTS
NSL - REAR FOG LIGHTS (L-LEFT; R-RIGHT)
RFS - REVERSING LIGHTS (L-LEFT; R-RIGHT)
SL - PARKING LIGHTS (H-REAR; V-FRONT; LH-REAR LEFT; LHI-REAR LEFT; LV-FRONT LEFT; RH-REAR RIGHT; RHI-REAR RIGHT; RV-FRONT RIGHT)

[TerminatorX5]

Originally Posted by TerminatorX5

PWM_FL_BIX
wert_02

high beam bi xenon together with high beams - not tested, change to wert_01

Just tested:

PWM_FL_BIX
wert_02 => change to => wert_01

in LCM module

high beam bi-xenon together with regular high beams

working fine


EDIT: coupled with simultaneous front fog lights, I have all 6 front lights shining at the same time!!!

[SlickGT1]

I forgot which one I did, but yea all 6 lights for me as well.

[upallnight]

I was told by my coder that I can have the car self lock itself after 2 minutes once all the doors are closed, but I had that feature on another car and had my keys lock in it one time so I told him not to add that feature.

[tmv]

I think he meant the car will re-lock itself after you un-lock it and no door open for about 2 min.

[SlickGT1]

Originally Posted by tmv

I think he meant the car will re-lock itself after you un-lock it and no door open for about 2 min.

You are correct.