Dynavin N6 install -Pics!

[ericpablo-e53]

Originally Posted by we350z

You can but imagine it would be a little bit of a bitch and you'd be removing your interior to get to it. I put the Eonon in mine and selling the stock NAV DVD. My boardmonitor has some bad pixels.

It would be pita offcourse.. but still need to drop a cable for my 2nd amp for subwoofer in the back.
Would it be that much more work to remove the harness? If yes the buyer just has bad luck haha

[crystalworks]

Originally Posted by ericpablo-e53

I have factory nav also, and want to install an eonon unit. Can i remove the old harness? Because someone wants to buy my 16:9 screen and mk3.. and he asked for the harness as well

I don't remember exactly. Might try my Avin install thread to see what was required to plug into what. Sorry, lol, getting older sucks as my memory is not as sharp as it used to be.

[ericpablo-e53]

Originally Posted by crystalworks

I don't remember exactly. Might try my Avin install thread to see what was required to plug into what. Sorry, lol, getting older sucks as my memory is not as sharp as it used to be.

Haha i recognize ur problem. But thanks in advance.. will look at that thnx

[THATDONFC]

I updated the firmware and now my phone volume is super loud. Not sure what happened here. Before it used to be lower than the music volume,now it is much higher. I have an e53 with dsp running 1.2.0

[540iEP]

I finally got around to installing the system. Took waaaay longer for me to do than originally thought because I tried to be meticulous with everything (and I've never really done this kinda install before). Everything works that I WAS able to connect, but I have some adapters and such coming to me so I can finish up some of my nuanced bits of my install. I'll have to go for the reverse camera install and subwoofer upgrade another time. Much left to do, but at least I have Nav and Bluetooth and all that jazz again.

FYI - if it's not been said anywhere yet, the mic in the kit has a 2.5mm plug, and not the standard 3.5mm everyone is used to for headphones. I'm reusing a mic that the previous owner installed with the parrot system I removed, so I'm waiting for a 3.5mm to 2.5mm adapter. I'll just have to pull the Dynavin and plug in the adapter and the mic should work.

[johnlacson]

How do these units stand up to sub-zero temp? (-5ºF/-20ºC) Do they introduce any more battery drain when the car is switched off?

[ericpablo-e53]

And the bm54 modul can i remove that one? Because its vroken and im not in the mood to fix it because i wamt to place an aftermarket headunit

[mrcarter20]

Originally Posted by johnlacson

How do these units stand up to sub-zero temp? (-5ºF/-20ºC) Do they introduce any more battery drain when the car is switched off?

Not sure if this helps but I'm located in Minot, ND where it can get down to -40s. I have the unit installed and had the X sitting out while I was at work in negative temps. I've had no start up problems whatsoever. I'd say it's a pretty solid unit.

[Gurjit]

bending them to a certain angle is the only way, takes a lot of fiddling to get right.
Currently my navi has stopped working, keeps poping "fetal error" codes, went through the crash log and the info says cannot find "mobilenavigator.maps"
on my last step with the naviextras support team, if it fails I have a bad head unit

[X5only]

Originally Posted by Gurjit

bending them to a certain angle is the only way, takes a lot of fiddling to get right.
Currently my navi has stopped working, keeps poping "fetal error" codes, went through the crash log and the info says cannot find "mobilenavigator.maps"
on my last step with the naviextras support team, if it fails I have a bad head unit

They probably meant a bad nav micro sd card. Have you tried with a different one?