|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
e70 2007 trailer hitch coding
|
Sponsored Links | |
|
#2
|
|||
|
|||
HKL
SCH_FBD aktiv SCH_TOEHKI aktiv TASTER_FBD aktiv FRM- LWR_STROM_HALT wert_01 LWR_STROM_NORMAL wert_01 LWR_STROM_RAMPE wert_01 KOMBI AHM_APPL_MONITOR aktiv RPDC ANHAENGERKUPPLUNG aktiv AHK_OFFSET offset_1 AHK_AUSBLENDUNG aktiv CIC MACRO_TRAILER_COUPLING aktiv AHM AENDERVARIANTE_AHM us CCMELDUNG_ABRISS_AHV cc_04bh CCMELDUNG_FEHLER_AHM cc_04bh CCMELDUNG_VERRIEGEL_AHV cc_04bh START_CCM klemme_15 TYP_AHV_SG keine_ahv SL_BEI_KZL_AKTIV nicht_aktiv Did you connect the AHM module that comes with the the OE wiring harness?
__________________
| '17 F15 X5 35D - Work horse | '17 F48 X1 MSport Daughter's daily | '22 Tesla MY LR Wife's Daily | '09 E70 X5 35D - Out to pasture | |
#3
|
||||
|
||||
Are these the differences in each of the listed modules after retrofitting the trailer?
Sent from my SM-N960U using Xoutpost.com mobile app
__________________
02 Imola on Black Dinan S2 4.6iS 00 RoyalRot on Sand/Black 740i Short Sport |
#4
|
|||
|
|||
Do you see AHM in FA and CAS? Looks like BD gave you a nice list of all the modules that need to be coded. My AHM didn't come with all the lines, so I had to add them and the command myself to make it work.
|
#5
|
|||
|
|||
I forgot to plug the 3-pin BUS connector from the trailer wiring harness .Now i can connect with AHM module . I went true all the trouble to install ISTA P to find out this. But when i try to do the codding with ISTA P it is making me to do all kinds of updates and I was waiting 1+ hours and i just stop it because my battery was dying. I am going to use the NCS expert and do it manually .
I dont have HKL module(because i dont have lift gate option) and in my FRM module I cant find :LWR_STROM_HALT wert_01 LWR_STROM_NORMAL wert_01 LWR_STROM_RAMPE wert_01 To make my lights work do I just need my AHM module programed ? My CCC is red because i did CIC conversion |
#6
|
|||
|
|||
Skip the HKL step, I included it in error
__________________
| '17 F15 X5 35D - Work horse | '17 F48 X1 MSport Daughter's daily | '22 Tesla MY LR Wife's Daily | '09 E70 X5 35D - Out to pasture | |
#7
|
|||
|
|||
Quote:
Do I have to purchase the OEM wiring harness and install this if I want to read the AHM module? I haven't done that yet.. is that why I'm getting the message? Last edited by E70X5M35i; 04-05-2020 at 10:48 PM. |
#8
|
|||
|
|||
The OE harness comes with the module. You can't code it if it isn't physically connected to your car
__________________
| '17 F15 X5 35D - Work horse | '17 F48 X1 MSport Daughter's daily | '22 Tesla MY LR Wife's Daily | '09 E70 X5 35D - Out to pasture | |
#9
|
|||
|
|||
Understood. Appreciate the response blue dragon! Thanks for your work and others in figuring out which settings need to be coded in order to add a hitch. I saw this thread and others in trying to figure out exactly which settings need to be coded.
I ordered the harness yesterday. Hopefully in 1-2 weeks time, I’ll have the harness and hitch installed . Love your X5 btw — looks awesome! |
#10
|
|||
|
|||
I think I am missing something. 08 E70. All wired up. I did manage to add +AHMU to the CAS and FRM with NCS Expert, and the AHM module shows up now. But its missing code(only has 2 options). And FRM is missing the LRM_STROM_*** codes.
Blue Dragon, it appears you posted CIC codes, do you have CCC? I dont have a RPDC module, but I do have PDC (which I am assuming controls front and rear). And while I have managed to use NCS Expert to alter code on both this E70, and a E46 before, I have never added code. It is as simple as pasting in code in the right format? Thanks guys for any help. I guess this is me not understanding NCS Expert enough. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|