E70 X5 LED Angel Eyes

[Harshilp29]

I just joined and just purchased my first BMW and thanks to another DIY on xoutpost i was able to change out my boring halo bulb with LED ones!! https://lh6.googleusercontent.com/-N...2014-12-03.jpg https://lh5.googleusercontent.com/-I...2014-12-03.jpg

[1naztyx5]

Congratulations on your new Car and welcome to the forum.

Lights look good, may want to consider some coding so you can have the halos brighter and delete the amber corner lights, here is a pic of mine .


Sent from my iPhone using Tapatalk

[Harshilp29]

Originally Posted by 1naztyx5

Congratulations on your new Car and welcome to the forum.

Lights look good, may want to consider some coding so you can have the halos brighter and delete the amber corner lights, here is a pic of mine .


Sent from my iPhone using Tapatalk

Is coding my halos difficult? So far i've had the car for two weeks and changed out the halos and fogs to LED as well as 22 interior lights, i have a CF BMW emblem on the way and would be open to more mods as they come, but for now the coding of halos sounds about right !! Thanks in advance !!!

[bestvaluestore]

Originally Posted by Shinchan

Pictures says it all...

No errors at all...

After some confirmation with the creator of Lux, LUX H8 is direct Plug and play with E70.

Nice eyes.How much are these?They are not stock ,right?

[Harshilp29]

This is a odd, but my LEDs i put on my e70 (2×20W H8 CREE R4 LED Angel Eye Halo Bulb Light 6500K for BMW E92 E93 E90 X5 White Error Free about 1200Lm (each)) are not bright nor do they stand out, i decided to revert back to halogen (NOKYA NOK7423 Pro Halogen Arctic White H8 35 Watt 7000K Light Bulb) and will post a side by side. I obviously know that halogen are not as "good" as LED but lets test it out. Also if anyone has suggestions for the BEST LED halos please advise! Thanks in advance !!

[umnitza]

You could do something crazy by getting the Orion V4 (if you want to take the complete nose panel with fenders off).



Or you can do our Dtec units (called ICETEC on our site due to a request from the factory).