Hi Folks,
Have just been making new 2009_1 disk with latest (March) speed cams. The Feb version has been working fine (thanks again, Nomad). Used UltraIso at minimum (4x) speed. Disk was not recognised so I made another which was also not recognised. Made another using ImgBurn at minimum (1x) speed and it worked.

Hi everybody, outstanding job. I am following the italian X3 forum expecially about the V32 poison and I have a couple of questions about it.
It seems "we" are stucked on some bugs of the V32 POISON.
I mean:
1. you MUST reselect the POI Icons if you switch off the engine/navigator;
2. having the possibility to switch off the vocal warning for the POI you have to accept some indications on the display in another language (probably this is due to the fact that the language change is just a cheat using two files of the same language one with the warning and the other one without);
3. the system gives warning about all the POIs in the vicinity and not ONLY of the ones in your route.
So I am wondering if these bugs are still there or any solution has been developed by anyone there in the states...thanks Folks!!

1. is likely a bug, hopefully it can be fixed.
2. you can disable the sounds by setting a destination an turning instructions off.
3. that's the way it works, unliky to be much iprovement IMO.

Thanks a lot for your clarification

Sorry, how can I turn "instructions off" ?

First select a destination. Then either :

- press the right rotary controler, then on the 'Instruction' menu option press and hold the controler, a red line will appear through the speaker symbol on the left.

- if you have VR, say "Instruction Off".

Fine, very easy thanks a lot

Angelych I am surprised by your question!!!
It is well known in our italian forum as well!!!
The trick is just deselect the speaker....that's it. So you are NOT actually switching off the instructions, but switching off the loudspeaker.

Guys, it worked fine in my X5 e53, however I've just changed my car, will it work in an e93?

Many thanks