Yes mate thats iy change the last 2 digits so: 1001 becomes 1002, 1003, 1004 etc...

thanks :)

ooooh I'm close

Heres my hex, is it just the 0630 I change and if so what to please?

Thanks

Dubs

Thats for a mk3 mate, is that what you are modding??

If it is then mod the 63 to 64 (anything different really).

Also if it is the mk3 you are modding the OS for, make sure that its saved as a mode2/form1 image.

****it must be a mode2/form1*** for it work correctly in a mk3, do not put a mode1 disc image in the mk3 as it will break your drive.

nope
mk4 I believe

Dubs

Then you are editing the wrong file, thats for the mk3 only.

Have a look at the dir tree in this pic mate.

V2/RR/101/BMWC01S

http://i169.photobucket.com/albums/u.../Capture-2.png

Many thanks for the info I'll change it, burn it and HOPEFULLY finish.

Thanks again
Dubs

Well holy crap it worked!!
Thanks for the assistance today i could not have done it without you ccfj1 and KiwiJochen.

One more Q about your reply up the top, If I do more mods to the nav I would change the hex to 1002, then next time i do them 1003 etc?

Dubs

No problem, yes, you can go back down too, as long as the number is different to the one in use, then it's all gravy mate.

Hi guys, I'm trying to follow the poison instructions from the first page. I've got to the bit where I need to run Navspeak.exe. Downloaded the 64 bit GTK and associated libraries but the navspeak.exe file just will not run. Any ideas?

Windows 7 64 bit (which i suspect might be the problem!).
T