sure, will do the retest again - i did a quick delete but did not repeat the quicktest again. my first time to run the DIS eh hehehe thanks a lot man.

Did the new head pass self tests?

did not try self test but definitely will pass as i have never experience any error while running the diagnosis.

here are some snapshots from the second quick test after performing quick delete. i don't understand though why the lcm is always giving an issue as i don't see anything wrong with the lightings.

cheers

The reason I asked about self test is that my GT-1 seems to work just fine but it fails the self test. I contacted Yohotech and they were no help at all.

There are no DME faults, but the "turbine speed" fault in the EGS would be the cause of the transmission failsafe issues.

speak to Jackey, though you have to be persistent in contacting them....when i had an issue with the first GT1 i had to send it back to them for repair, sent it the second time as it was completely unusable then they replaced it with the new one. i've spent a lot time talking to him over the phone prior to this. sent thousands of emails also fortunately they replaced it with the brand new one.

that's what i thought as this is the code which appears on my Rev Scanner (iphone) exact code is 'P0715 input turbine speed sensor circuit malfunction' but even the dealer can't figure it out and they are not familiar with the turbine speed sensor maybe because it's generic code? believe me the dealer here is crap they change parts when the computer tells them but without narrowing the real issue (it happened to me twice). Is it possible to identify the part needed?

thanks

You need to click on the right pointing arrow in the bottom RH corner and this will give you the list of all the items that have failed. From there you can test them one by one by including them in your test plan.

This may give you some detailed idea of where the fault lies and what needs replacing.

Got a question for you guys with this setup... Did you have to buy vmware, or did you find a free version/download. The only free one I see on VMwares site asks for compant information and all to register it before downloading... doesn't make sense.

I just want to make a couple vm partitions to instal dis and sss operating systems, is that too much to ask? :D