Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   What did you do to / for your E53 today?? (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/78921-what-did-you-do-your-e53-today.html)

OptimusPriM5 07-28-2017 10:04 AM

Quote:

Originally Posted by CleanIsFast (Post 1113605)
Sold the 4.6iS. Adios old friend

Congrats!

crystalworks 07-28-2017 10:15 AM

Quote:

Originally Posted by CleanIsFast (Post 1113605)
Sold the 4.6iS. Adios old friend

You were just coming up on a year of ownership weren't you? What was the reason for parting ways (if you don't mind of course)?

X53Jay4.8is 07-28-2017 04:58 PM

Quote:

Originally Posted by CleanIsFast (Post 1113605)
Sold the 4.6iS. Adios old friend

Now don't go do anything foolish like sell the E39 M5????

srmmmm 07-29-2017 02:37 PM

1 Attachment(s)
Keeping it pretty with a new rear roundel last week :D

2002 X5 3.0 327,500 miles
2014 428i 29,000 miles

2004 325i sold at 123,600 miles
2001 325i sold at 66,000 miles

1970 Firebird Under restoration

Ryoken 07-29-2017 02:44 PM

changed plugs and coil tubes on the passenger side then removed the drivers side rocker cover to put a new gasket on ,
now ive got to fathom out how to put it back together without removing the black box that connects to the injectors
(how do you you get that box off) I cant see the clips

156k and it looks clean in there

jontezan 07-29-2017 03:15 PM

Quote:

Originally Posted by Ryoken (Post 1113674)
changed plugs and coil tubes on the passenger side then removed the drivers side rocker cover to put a new gasket on ,
now ive got to fathom out how to put it back together without removing the black box that connects to the injectors
(how do you you get that box off) I cant see the clips

156k and it looks clean in there



There is one clip for each connector that you can pry loose with a small screwdriver. Or you can do it the easy way, and unbolt the two 10 mm nuts that holds in it place. Take a grip with one hand on each side of the box and just pull it out. The locking clips in the connectors wont brake they will spring by the locking pin. This has worked wery well for me everytime i removed them [emoji106]


Skickat från min iPhone med Tapatalk

Ryoken 07-29-2017 03:34 PM

that sounds like I will break something :)

but I shall try , removal of rocker cover was a bit tight , with it in situ

but its getting dark now , and its beeroclock

andrewwynn 07-29-2017 08:20 PM

I cleaned my engine bay: it was a disaster after my mechanic at the last oil change did not replace the o-ring on the oil filter and it leaked like a sieve. My never had a drop of oil on it engine ended up caked in oil/dirt mix. I did my own oil change last week and cleaned the engine bay today with scrubbing bubbles. I will do one more scrub before I put the skid plate and front chin aero parts back on.


Sent from my iPhone using Tapatalk Pro

itsbrokeagain 07-29-2017 09:55 PM

Gave old Betsy a thorough scrubbing inside and out. Got the claybar out some polishing compound and some carnuba wax...first good detail since she left the showroom floor I think. PO did not car except to maybe wash the outside twice a year.

Passed 130k this morning as well

Baker 08-01-2017 02:25 AM

Installed an E-Light Ultimate to get the three-blinker, angel eye DRL, and auto folding mirrors. Auto unlock on key out is not working at this stage - think I might have to add an extra wire per this thread, but waiting on the company to get back to me confirming it.

Over the last couple of weeks also changed angel eyes to LED, and updated my maps to the last Australian version (2014 :().


All times are GMT -4. The time now is 04:23 PM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.