Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   Got Bored,...Pulled the Trigger Here She IS!!!!!.....>>>>>>> (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/92262-got-bored-pulled-trigger-here-she.html)

pnoyako85 03-27-2014 07:14 PM

Ahhh thanks guys!!!!! I love this e46. Justdid my rotors and will post pics later on. Cleaned up the rims too bit.....
Getting my X5 back tmrow and Saturday doing Motor Mounts Hopefully thats it and maybe next week will do flex disc(2) center support bearing, tranny mount. Jst for preventative....
And maybe next month will have RB do my subframe bushings

Ricky Bobby 03-27-2014 07:43 PM

Just give me a heads up bro so I can get the tool rented out for the job lookin forward to seeing pics of the flex discs (I.e. How bad are they) and how she drives with the new rear susp

pnoyako85 03-27-2014 09:29 PM

Texted it to you.... Reply here how they look

Ricky Bobby 03-28-2014 10:23 AM

The guibos look pretty visibly dry and cracked Mike, if you are doing the center carrier bearing I'd do both the guibos too.

Cheapest I've found is here:

BMW X5 Driveshaft Parts | FCP Euro

Either way its about $260 for all 3 parts, and any hardware to reattach it, but since those guibos take a lot of the vibration out of driving it really should smoothen it out.

pnoyako85 03-28-2014 10:48 AM

Motors mounts this weekend


Then RB-
4 parts im doin

2 flex discs
Tranny mount
Center support bearing

Ricky Bobby 03-28-2014 10:53 AM

If you haven't drained and filled the diffs I'd do it too, you need 3 quarts of 75w-90 gear oil, I think 1.2 in the front and 1.8 in the rear?

pnoyako85 03-28-2014 11:04 AM

Quote:

Originally Posted by Ricky Bobby (Post 987686)
If you haven't drained and filled the diffs I'd do it too, you need 3 quarts of 75w-90 gear oil, I think 1.2 in the front and 1.8 in the rear?

That Too 4.8X5 can do that for me.....


here is the beater Mods

E46 Transformation
Tecc E46 Transformation - YouTube

pnoyako85 03-30-2014 12:22 AM

Vibrations Solved....
Mod and replacements

X5 4 8is mod - YouTube


-Motor Mounts
-Full Front and Rear Suspension set
-Rear Section (Ball Joints,Upper Control Arm,Rear Control Arms)
-Front Section (Upper & Lower Control arms,Ball Joints,inner&outer tie rod,stabilizer links)
-Axles
-Rotors/Pads

Next project
-2 flex discs,center support Bearing,Tranny Mount

pnoyako85 03-31-2014 12:37 AM

7 Attachment(s)
SO I let Pat 4.8X5 aka PatsAutowerks in P.A. do my Rear Suspension and 2 front Arms and here is his job..really good and Happy with it

note that this was the Hardest to change in a Garage as VAC says it will be harder to change them w/o a lift but he got it done.

pnoyako85 03-31-2014 12:41 AM

7 Attachment(s)
the Very next day had my Boy MikeT at International 2000 NY, have my
-Motor Mounts Replace
-Axles
-Rotors n pads
-Front suspension
-Battery


https://www.youtube.com/watch?v=tiBq...ature=youtu.be


All times are GMT -4. The time now is 01:07 AM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.