Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E70) Forum (https://xoutpost.com/bmw-sav-forums/x5-e70-forum/)
-   -   What have you done to your E70 today? (https://xoutpost.com/bmw-sav-forums/x5-e70-forum/92812-what-have-you-done-your-e70-today.html)

montela1980 08-18-2019 04:31 PM

Quote:

Originally Posted by wacuna (Post 1167427)
Oil changed, replaced all interior light to LED, drive belt pulley replaced.



Nice! How did you remove the back passenger lights ? I tried 3 times and i failed each time...


Sent from my iPhone using Tapatalk

gatojurko 08-18-2019 05:05 PM

Oil change!https://uploads.tapatalk-cdn.com/201...b0b5826402.jpg

Sent from my SM-G935F using Tapatalk

gatojurko 08-18-2019 05:06 PM

Active seat airbag hole fixing with chermetic! May be air pump broke because of these 3 holes in massage airbag! https://uploads.tapatalk-cdn.com/201...a7541cf95a.jpg

Sent from my SM-G935F using Tapatalk

gatojurko 08-18-2019 05:12 PM

Bought for 61-63e air pump on ebay! Hope to get it out need only to take off backrest part of seat!https://uploads.tapatalk-cdn.com/201...49267feb3b.jpghttps://uploads.tapatalk-cdn.com/201...82931312c5.jpghttps://uploads.tapatalk-cdn.com/201...8728cfc13a.jpg

Sent from my SM-G935F using Tapatalk

spyro235 08-19-2019 08:10 AM

Quote:

Originally Posted by bandit4x4 (Post 1166185)
https://uploads.tapatalk-cdn.com/201...f8d5e2a3f1.jpg



So the rear four bolts of this cover are a PITA... had to make a tool, cut down a T-40 Torx bit was a ball buster on both removal and install.

Can you elaborate on how you had to make the tool? I'm about to do this and want to go into it prepared for those 4 bolts, rather than get there and start having to brainstorm what to loosen, move, cut down, etc.

bandit4x4 08-19-2019 08:15 AM

Quote:

Originally Posted by spyro235 (Post 1167519)
Can you elaborate on how you had to make the tool? I'm about to do this and want to go into it prepared for those 4 bolts, rather than get there and start having to brainstorm what to loosen, move, cut down, etc.



Cut down a TORX bit to about 1/2” in total length used with a 1/4” ratcheting combination flex head wrench.




Sent from my iPhone using Tapatalk

Muzimak 09-04-2019 02:53 AM

Replaced the Stabilizer Links, almost forgot how smooth this car is, all the steering wheel rattling is gone, no more knocking sounds on bumps.

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

https://hosting.photobucket.com/imag...080&fit=bounds

One simply just fell out when we tried pulling it out, that's how bad they were.

Aquamania 09-04-2019 02:57 PM

Yesterday I put on a coat of Nu Finish. The once a year car polish. Looks great! Going to re clean the interior with the McGuire's interior cleaner.

SF2000x5 09-16-2019 05:49 PM

took it out tailgating over the weekend with the 2 small trunk lights on the whole time and didn't even crank longer than usual and started right up.

let me know if you guys know if theres a way to turn off the all the lights with a switch. the front upper switch between the visors don't turn the rear trunk lights in the hatch off.

Aquamania 09-17-2019 02:16 PM

Added these to my steering wheel. I love the look and fit perfectly!!


All times are GMT -4. The time now is 10:36 AM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.