You people suck. 12 years later, I finally replace speakers.

[semcoinc]

Originally Posted by Clockwork

sensational info and pics. thank you sir. I'm putting the same speakers in so its nice to see real world pics for you guys.

You're welcome.

PS: FYI, I used a short length of wire to make the connection from the factory tabs to the JL tabs. Not knowing the strength of the JL tabs, I did not want to bend them over and solder them. Also, I used silicone adhesive on the back side of the JL to adhere them to the factory mountings. For good measure I put a bead of silicone sealer on the outside speaker lip as well.

And BTW, you'll need a T30 bit to remove the tweeter mounting screws




PS: Here is the back side of the front door woofer in its housing after I de-soldered the factory speaker terminals. Note the 2ohm marking



Mike