Just replaced LCD screen in Nav monitor!

[rebouch1]

Toadhall1248 - thanks for the tip....after installing 3 different screens with the same results, i went ahead and followed Texaspaul's post on the link you provided. These are the only additional tips that I have:
1. Follow Texaspaul's recommendation and take a pictures of all the screws before you adjust. I made a lot of adjustments initially to see what the screws did to the screen and I really lost myself, so I had to reset them all back to the picture I took before I started.
2. Use a mirror (my wife held it so that when I was adjusting the screws I could see what it was doing to the screen. You still have to put it in the "normal" position to ensure that the viewing angle is good from the driver/passengerseat.
3. The screws that seemed to work for me was a combination of the 2nd from the bottom of the left screw set (4 screw row) in Texaspauls and the 3rd and 4th screws from the bottom on the right screw set (6 screws in the row).

It just takes patience and small adjustments to each of the screws to get the result.