Xoutpost.com - Coding, what not to forget?

Xoutpost.com (https://xoutpost.com/forums.php)

- X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)

- - Coding, what not to forget? (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/89967-coding-what-not-forget.html)

Finally got to try NCS Expert. Tried coding some LCM options first.

I want to code flashers on with high beams. However, like jgold I can't find code line PWM_FL_BIX in my LCM read file.

Anyone have the same problem and find a solution?

Quote:

Originally Posted by SlickGT1 (Post 908678)

For those that convert to springs from airbags.

This has to be removed from SA
0220 00000000 0000000000000200 0000000000 1 NIVEAUREG //Level control system //Niveauregulierung
0221 00000000 0000000400000000 0000000001 1 LFEDER_2_ACHS //2-axle-air springing //2-Achs-Luftfederung (nur in Verb. mit High-Kombi)

SLS Inactive Message.
GM3 module,
NIVEAUREG - Nicht_Malden

Hey slick, I've read up to page 21 on this thread to see if anyone elaborated on your post but didn't see any. What do you mean by above statement? Once removed, don't you need a new code to replace it?

BMW X5 4.8iS 2005

Decided to revive this thread with a coding question... I have read hundreds of pages and am finally ready to do some coding. I'm going to change all of the items listed below, but then I just remembered that I want to turn off the legal disclaimer on the nav screen on start up. I can't seem to find it right now..

Windows roll up/down when the door is open (GM3)
FH_TIPP_DISABLE_TUER_AUF - nicht_aktiv (Changed)

Windows/sunroof close on remote (GM3)
KOMFORTSCHLIESSUNG_FB – aktiv (Changed)

High beams on with bi-xenon (LCM)
PWM_FL_BIX - wert_01 (Changed)

Doors auto lock (GM3)
VERRIEGELN_AUT_AB_X_KM/H - aktiv (Changed)
VERRIEGELN-XKM/H_SENDER_1 - aktiv (Changed)
VERRIEGELN-XKM/H_SENDER_2 - aktiv (Changed)
VERRIEGELN-XKM/H_SENDER_3 - aktiv (Changed)
VERRIEGELN-XKM/H_SENDER_4 - aktiv (Changed)
VERRIEGELUNGSSCHWELLE - 16_KM/H (NOT Changed)

Cold monitoring off for Angel Eyes (LCM)
KALTUEBERWACHUNG_SL_LV - nicht_aktiv (Changed)
KALTUEBERWACHUNG_SL_RV - nicht_aktiv (Changed)

Gong off for key left in ignition (LCM)
ZUENDSCHLUESSEL_WARNUNG - nicht_aktiv (Changed)

Single push of remote to unlock all doors (GM3)
ZV_SELECTIV - nicht_aktiv

Quote:

Originally Posted by TiminIndy (Post 1107742)

You need to change country to ECE; (Europe)
GT LAENDERVARIANTE_GT ece Remove Nav Accept
It's also possible to enable video in motion if you add or modify a parameter :driver:

Quote:

Originally Posted by deepblonde (Post 1107750)

You need to change country to ECE; (Europe)
GT LAENDERVARIANTE_GT ece Remove Nav Accept
It's also possible to enable video in motion if you add or modify a parameter :driver:

Thanks - do you know what module that is in?

Quote:

Originally Posted by TiminIndy (Post 1107759)

Thanks - do you know what module that is in?

To just remove the 'I accept ' screen?:

Quote:

Originally Posted by SlickGT1 (Post 908678)

My GM3 module does not have this line in the code. I do have it in the LCM, and have set it to nicht_malden, but the message still appears :dunno:

Any thoughts?