![]() |
Quote:
normal high beams are the xenons with the covers up. flash to pass are the h7's in the inner bowls when you pull flash to pass, do both light up (h7's and xenon's)? when you push to go to high beams then are both lit? |
daytime, no front lights are on - flash the stalk, center highbeam halogen lights flash
daytime, no front lights are on - push the stalk, nothing happens. nighttime, xenons (low beams) are active, front fog lights are on - flash the stalk, center highbeam halogen lights flash, xenon lights remain on, bi-xenon shield is Not activated, front fog lights remain on nighttime, xenons (low beams) are active, front fog lights are on - push the stalk, center highbeam halogen lights come on, xenon lights remain on, bi-xenon shield is activated, front fog lights remain on |
Quote:
will be doing on saturday. I think I am turning my side markers back on. Just not comfortable driving around without. I dont see any other cars without them, and I dont want some cop getting excited. |
Quote:
wait - I just looked at the lsz dump from a couple of pages ago, and I dont have this in my module? Is it possible its an older code? |
Quote:
i played with front sidemarkers, and still prefer them to be off - in daytime, no lights are on, at night the xenons are on - the parking lights are not on by themselves when the switch S8 is in auto position. if somebody can't see the xenons shining, then we have other problems than the front parking lights |
Quote:
|
Quote:
|
I think it's because term pulls the data from all his modules. Not the individual ones.
|
Quote:
Term, look back on page 14 or 15 or so. Slick, did you use a different line? |
i found your post... interesting... i'll try to find out to see which module has it... anyone else tried this line? Slick, did you get that function coded? which module was that line?
|
| All times are GMT -4. The time now is 05:20 PM. |
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.